Description
Product Summary
The Goodman HKA-15C is an HKA series electric heat kit for Goodman and Amana R-410A air handlers (ARUF, ARPF, ASPF) and MBR and MBVC modular blowers. It installs in the heater opening of the air handler or modular blower and adds electric heat: primary heat with an air conditioner, or auxiliary and emergency heat with a heat pump.
It is rated 14.25 kW (48,600 BTU/h) at 240V and about 10.69 kW (36,450 BTU/h) at 208V. It comes with factory-installed circuit breakers that serve as the service disconnect and overcurrent protection for the heater. The heat is split across two heater circuits, which can be fed separately or through single-point wiring where the equipment allows it.
Key Features
- 14.25 kW of electric heat: 48,600 BTU/h at 240V.
- Built-in circuit breakers: act as the service disconnect and heater overcurrent protection.
- Goodman OEM fit: made for ARUF, ARPF and ASPF air handlers and MBR and MBVC modular blowers.
- Two heater circuits: lets the thermostat bring heat on in stages.
Ideal Applications
- Auxiliary and emergency heat for a heat pump
- Primary heat for an air conditioner system
- Replacing a failed HKA heat kit
Frequently Asked Questions
Which equipment does the HKA-15C fit?
It is made for Goodman and Amana R-410A air handlers (ARUF, ARPF, ASPF) and MBR and MBVC modular blowers. Before ordering, check that the HKA-15C is listed in the heater kit table of your air handler or modular blower's installation manual.
How much heat does it put out at 208 volts?
It is rated 14.25 kW (48,600 BTU/h) at 240V and about 10.69 kW (36,450 BTU/h) at 208V.
Does it come with a circuit breaker?
Yes. It has factory-installed circuit breakers that serve as the service disconnect and overcurrent protection for the heater.
What size wire and breaker do I need?
Use the minimum circuit ampacity (MCA) and maximum overcurrent protection (MOP) on the air handler or modular blower's rating plate with this kit installed, because the numbers change from one blower to the next. Have a licensed electrician or HVAC contractor make the connection and follow local code.
Can I use it with a heat pump?
Yes. With a heat pump it provides auxiliary heat in cold weather and emergency heat. With an air conditioner it is the main heat source.
White Paper
