Description
Product Summary
The Ameristar KIT20650 is the factory natural gas to propane (LP) conversion kit for Ameristar A801X 80% AFUE single-stage gas furnaces. These units ship set up for natural gas, and this kit supplies the burner orifices and gas valve conversion parts needed to run them on propane.
Propane is supplied at a higher pressure and carries more heat per cubic foot than natural gas, so the unit must be converted before it is fired on LP. The conversion must be done by a qualified, licensed technician following the installation instructions, with gas supply and manifold pressures set and checked before the unit is put into service.
Key Features
- Factory approved kit: the LP conversion kit Ameristar lists for this equipment.
- Matched orifices: sized for propane on these burners.
- Valve conversion parts: converts the gas valve regulator from natural gas to LP.
- Conversion labels included: marks the unit as converted for the next technician.
Frequently Asked Questions
Which equipment does the KIT20650 fit?
It is listed for Ameristar A801X 80% AFUE single-stage gas furnaces. Always confirm the kit against the model number on the unit rating plate and the installation instructions.
Do I need this kit if my building uses propane?
Yes. This equipment ships for natural gas and must be converted with the factory approved kit before running on propane.
Can I use this kit on an ultra low NOx unit?
No. Ultra low NOx models are rated for natural gas only.
Who should install it?
A qualified, licensed gas technician. Incorrect conversion can cause unsafe combustion.
