Description
Product Summary
The Goodman LPM-31 is the factory propane (LP) conversion kit for Goodman GR9S80 (upflow/horizontal) and GD9S80 (downflow/horizontal) 80% AFUE single-stage gas furnaces, including the standard and low NOx (X) versions. These furnaces ship set up for natural gas, and this kit supplies the parts needed to run them safely on propane instead.
Propane burns at a higher pressure and heat content than natural gas, so the furnace needs smaller burner orifices and a gas valve regulator change before it can be fired on LP. This kit also includes a low LP pressure switch, which shuts the burners down if propane supply pressure drops too low. The conversion must be done by a qualified, licensed technician following the furnace installation manual, and the gas supply and manifold pressures must be set and checked before the furnace is put into service.
Key Features
- Goodman OEM kit: the conversion kit Goodman lists for these furnace series.
- Matched orifices: sized for propane on these furnace burners.
- Valve conversion parts: converts the gas valve regulator from natural gas to LP.
- LP pressure switch included: protects the furnace if supply pressure drops.
Frequently Asked Questions
Which furnaces does the LPM-31 fit?
It is listed by Goodman for the GR9S80 and GD9S80 furnace series. Always confirm the kit against the model number on your furnace rating plate and the installation manual.
Do I need this kit if my home uses propane?
Yes. These furnaces are shipped for natural gas and cannot be fired on propane until they are converted with the correct kit.
Can I use this kit on an ultra low NOx furnace?
No. Ultra low NOx Goodman furnaces (model numbers with a U before the last letters) are rated for natural gas only.
Who should install it?
A qualified, licensed gas technician. Incorrect conversion can cause unsafe combustion.
