Description
Product Summary
The Honeywell Residential TB6575A1000 is a SuitePRO digital fan coil thermostat from Honeywell Residential for 2-pipe or 4-pipe fan coil systems. It runs on 120V or 240V line voltage, controls a 3-speed fan and supports seasonal, manual or automatic heat and cool changeover, which makes it a common choice for hotels, apartments, condos and offices with fan coil units.
A fan coil thermostat reads the room temperature and switches the fan speed and the heating or cooling valve to hold the setpoint. This model uses proportional plus integral (P+I) control for steady temperatures, has a backlit display that shows °F or °C, and keeps its settings in memory during a power loss with no batteries needed. Installers can set heating and cooling setpoint limits, adjust the deadband for automatic changeover, add an optional remote indoor sensor and use the freeze protection feature, which turns on heat when the space gets too cold. Pre-installed lead wires speed up installation.
Before you order, match TB6575A1000 to the part number on the thermostat you are replacing, and confirm that your fan coil uses 120V or 240V line voltage and a 2-pipe or 4-pipe setup. If you are not sure which thermostat your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Line voltage: 120V or 240V, 50/60 Hz.
- Fan coil control: 3-speed fan, 2-pipe or 4-pipe systems.
- Changeover: Seasonal, manual or automatic heat and cool changeover.
- Genuine Honeywell Residential part: Manufacturer part number TB6575A1000, factory new.
Frequently Asked Questions
Is this a genuine Honeywell Residential part?
Yes. This is the Honeywell Residential TB6575A1000, a factory-new fan coil thermostat from Honeywell Residential.
How do I make sure it fits my equipment?
Compare TB6575A1000 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
Will this thermostat work with my fan coil?
It is built for 120V or 240V fan coil units with a 2-pipe or 4-pipe setup and up to 3 fan speeds. It is not a 24V thermostat, so confirm your unit's control voltage before you order.
Does it keep its settings after a power outage?
Yes. Settings are stored in memory, so they stay in place through a power loss and no batteries are needed.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
