Description
Product Summary
The RDI Systems PC99LOP-2E is a 1 HP low temp hermetic reciprocating air-cooled condensing unit from the RDI 120 Series PC Pre-Charged line rated at 3,511 BTU/h (-20°F SST, 90°F ambient, R-404A). It is wired for 208/230V 1-phase 60 Hz power.
RDI PC systems ship pre-charged with refrigerant for up to 50 ft of line, which shortens field charging time on walk-in cooler and freezer installations. The air-cooled cabinet is rated for indoor or outdoor installation.
Approved refrigerants: R-404A. Pair it with a matching evaporator sized to the box load; contact HVAC365 for a system match.
Key Features
- 1 HP Hermetic Reciprocating Compressor: sized for low temp walk-in duty (Copeland CF04K6E)
- Published Capacity: 3,511 BTU/h at -20°F SST, 90°F ambient, R-404A for accurate load matching
- Refrigerant: approved for R-404A
- Pre-Charged System: factory charge for up to 50 ft of line reduces installation time
- Complete High Side: liquid line filter/drier, sight glass, pressure controls, receiver with valve and base valves
- Outdoor Ready: low-ambient controls, crankcase heater and weatherproof housing
- UL Listed: UL 1995 listed, leak and dielectric tested before shipment
Ideal Applications
- Walk-in freezers for restaurants and commercial kitchens
- Convenience store and grocery freezer boxes
- Ice cream and frozen food storage
- School, hospital and institutional freezers
- Replacement condensing units for existing walk-in freezer systems
Frequently Asked Questions
What refrigerant does the PC99LOP-2E use?
The PC99LOP-2E is approved for R-404A. RDI PC units ship pre-charged for up to 50 ft of line.
What power supply does the PC99LOP-2E need?
It requires 208/230V 1-phase 60 Hz power, with a minimum circuit ampacity of 14.3 A and maximum overcurrent protection of 20 A.
How much refrigeration capacity does the PC99LOP-2E provide?
It is rated at 3,511 BTU/h at -20°F SST, 90°F ambient, R-404A. Actual capacity depends on box temperature, ambient temperature and line length, so size the system to the calculated box load.
Is the PC99LOP-2E for a walk-in cooler or freezer?
It is a low-temperature unit for walk-in freezers and other boxes held below freezing.
What evaporator should I pair with it?
Choose an evaporator rated for the same refrigerant and temperature application with capacity matched to the condensing unit at your design suction temperature. HVAC365 can help match the right evaporator to this unit.
White Paper
