Description
Product Summary
For replacement in existing systems. This equipment uses R-404A, which federal refrigerant rules limit in new refrigeration system installations. It is sold for repairing or replacing equipment in existing systems. Check the federal and local requirements that apply to your project before installing.
The Tecumseh AJ2433Z-XD3A is a 3/4 HP hermetic reciprocating compressor from Tecumseh's AJ family, built for freezers, ice cream cabinets and other low temperature equipment. It runs on 208/230V 1-phase, 60 Hz power and is rated at about 3,422 BTU/h.
This listing is the AJ2433ZXD3A configuration. It is approved for R-404A, with an evaporating range of -40°F to 10°F. Match the refrigerant, voltage and start components to the unit you are servicing before you install it.
Sold as a replacement part for servicing existing equipment. Federal refrigerant rules still allow these refrigerants in systems that are already installed to be repaired, including compressor replacement, for the rest of their service life.
Key Features
- Genuine Tecumseh: OEM AJ family compressor, the same series used in many original reach-in, display and condensing unit builds.
- Reciprocating design: hermetic reciprocating pump with a CSR motor and high start torque (hst).
- Refrigerant: rated for R-404A.
- Ready to ship: stocked in Florida for fast replacement jobs.
Ideal Applications
- Replacing a failed compressor of the same model
- Service work on freezers, ice cream cabinets and other low temperature equipment
Frequently Asked Questions
Does the compressor come with a start relay and overload?
Start and protection components depend on the model and are often sold separately. Check the electrical components listed for the AJ2433Z-XD3A in Tecumseh's data and order the matching relay, overload and capacitor kits if your old parts are worn.
Can I use it on a different refrigerant?
Only on the refrigerants it is rated for: R-404A. Using any other refrigerant can damage the compressor and void the warranty.
What should I do before installing it?
Find out why the old compressor failed, replace the filter drier, pull a deep vacuum and charge by weight to the equipment's nameplate.
