Description
Product Summary
The ASCO 8215B080CSA is a gas valve from ASCO, described by the manufacturer as: 120/60 110/50 VAC 2" NPT N.C. 2 way gas solenoid blocking valve 3251000 BTU 25 PSI max 00589. It is rated for 120V and sized for 2" connections. It replaces 8215G80 & 8215G080 821580 8215080.
A gas valve controls the flow of gas to the burner and, on pilot models, to the pilot. It opens only when the ignition system or thermocouple tells it the appliance is ready, regulates the outlet pressure to the burner and closes the moment the call for heat ends or a safety fails. Common signs of a failed gas valve are an igniter or spark that never lights the burner even though the valve receives voltage, a pilot that will not stay lit, manifold pressure that cannot be set, or a burner that keeps firing after the thermostat is satisfied.
Before you order, match 8215B080CSA to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine ASCO part: Manufacturer part number 8215B080CSA, factory new.
- Voltage: 120V.
- Pipe Size: 2".
- Cross-reference: Replaces 8215G80 & 8215G080 821580 8215080.
Frequently Asked Questions
Is this a genuine ASCO part?
Yes. This is the ASCO 8215B080CSA, a factory-new gas valve from ASCO.
How do I make sure it fits my equipment?
Compare 8215B080CSA with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 8215B080CSA replace?
The ASCO 8215B080CSA replaces 8215G80 & 8215G080 821580 8215080.
Can I convert this gas valve between natural gas and LP?
Only if the valve is listed as convertible and the correct conversion kit and burner orifices are used. Gas conversions must be done by a qualified technician following the appliance manufacturer's instructions.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
