Description
Product Summary
The Braeburn 1030 is a circulator pump from Braeburn, described by the manufacturer as: 24V/Millivolt braeburn economy series Non-Programmable for single stage conventional or heat pump with 4.4 sq in display installer lockout and adjustable temperature limits. It is rated for Millivolt. It replaces 1000 1010 1020.
A circulator pump moves heated or chilled water through a hydronic system. Circulators are matched by flow, head, horsepower, voltage, flange size and body material. Cast iron is used in closed heating loops; bronze or stainless steel is required for open and potable water systems. Replace a circulator that hums without pumping, leaks at the body or seals, runs hot or is noisy after air has been purged from the system.
Before you order, match 1030 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Braeburn part: Manufacturer part number 1030, factory new.
- Voltage: Millivolt.
- Cross-reference: Replaces 1000 1010 1020.
- Part type: Circulator Pump.
Frequently Asked Questions
Is this a genuine Braeburn part?
Yes. This is the Braeburn 1030, a factory-new circulator pump from Braeburn.
How do I make sure it fits my equipment?
Compare 1030 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 1030 replace?
The Braeburn 1030 replaces 1000 1010 1020.
Can I use a cast iron circulator for domestic hot water?
No. Open systems that bring in fresh water need a bronze or stainless steel circulator to prevent corrosion.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
