Description
Product Summary
The Carlin 60200FRS is a burner primary control from Carlin, described by the manufacturer as: 602FR gas burner primary control Rev.c+ 30/6/30 blue serv. It replaces 6020002FR363S 6020002FR943S 60200FR 6020002FRS 6020002FR040S 6020002FR11S 6020002FR161S 6020002FR362S 60200FR343S.
A burner primary control or flame safeguard manages the start-up, purge, ignition, flame proving and shutdown of a burner. It closes the fuel valve and locks out if flame is not proven or is lost. Look at the lockout history, flame signal and wiring first. Replace the control if it fails its self-check, will not energize its outputs or resets incorrectly.
Before you order, match 60200FRS to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Carlin part: Manufacturer part number 60200FRS, factory new.
- Cross-reference: Replaces 6020002FR363S 6020002FR943S 60200FR 6020002FRS 6020002FR040S 6020002FR11S 6020002FR161S 6020002FR362S 60200FR343S.
- Part type: Burner Primary Control.
- Ready to ship: In stock with live quantities shown on this page.
Frequently Asked Questions
Is this a genuine Carlin part?
Yes. This is the Carlin 60200FRS, a factory-new burner primary control from Carlin.
How do I make sure it fits my equipment?
Compare 60200FRS with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 60200FRS replace?
The Carlin 60200FRS replaces 6020002FR363S 6020002FR943S 60200FR 6020002FRS 6020002FR040S 6020002FR11S 6020002FR161S 6020002FR362S 60200FR343S.
Do I need a new subbase or scanner with this control?
Usually not, as long as the existing subbase and flame detector are compatible with this control. Confirm compatibility with the burner manufacturer's documentation.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
