Description
Product Summary
Danfoss part number 060-5231 is a genuine Danfoss KP pressure control (low range, 6" to 108 psig, 10 to 60 psi differential, 1/4" MFL, SPDT, 24 Amps 240 V).
Danfoss KP pressure controls switch compressors, condenser fans and alarms on and off as system pressure rises and falls, protecting refrigeration and air conditioning equipment from low suction or high discharge pressure. The cut-in and differential are set on the front of the control, and the snap-action contacts give a clean, repeatable switch point.
Key Features
- Snap action electrical contacts
- The fail-safe dual bellows used in 600 psi controls prevent refrigerant loss and enable premature cut-out when a fault occurs
- Manual trip allows electrical function test without tools
- Repeatability less than 0.1 psi drift, even after 400000 cycles
- Contact rating: 24 F.L. Amp 240 Vac
Ideal Applications
- Low and high pressure compressor protection
- Condenser fan cycling
- Walk-in coolers and freezers
- Commercial air conditioning and heat pump systems
