Description
Product Summary
The Erie AT33A000 is a zone valve actuator from Erie, described by the manufacturer as: 24V N.C. non spring return electric valve actuator. It is rated for 24V and normally closed.
A zone valve actuator, also called a powerhead or power unit, is the motor that opens and closes a zone valve body. It mounts on the existing valve so the valve can be repaired without draining or cutting into the piping. Replace the actuator if it hums or clicks without moving the valve, is stuck open or closed, or its end switch no longer closes.
Before you order, match AT33A000 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Erie part: Manufacturer part number AT33A000, factory new.
- Voltage: 24V.
- Normal Position: Normally Closed.
- Part type: Zone Valve Actuator.
Frequently Asked Questions
Is this a genuine Erie part?
Yes. This is the Erie AT33A000, a factory-new zone valve actuator from Erie.
How do I make sure it fits my equipment?
Compare AT33A000 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
Will this actuator fit my valve?
Match the valve series and part numbers listed for this actuator, along with the voltage, normal position and end switch configuration.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
