Description
EZ Plenum EZRVCD10 10 Inch Galvanized Roof Vent
The EZ Plenum EZRVCD10 is a 10 inch extra-tall roof vent for bath, kitchen and ventilation exhaust through the roof. It comes with a 9 inch round collar, a backdraft damper and a removable birdscreen, so it is ready to connect and flash in.
Key features
Extra-tall profile. At 14-1/8 inches tall, the hood sits well above the roof surface.
9 inch collar. A round collar comes standard, so the duct connects straight to the vent.
Backdraft damper and birdscreen. The damper closes against outside air, and the removable screen keeps birds and pests out.
G-90 galvanized steel. 26 gauge G-90 galvanized steel with a flanged base resists corrosion and flashes in cleanly.
Sizing
The vent is 10 inches wide and 14-1/8 inches tall overall, on a 10 inch base with 3 inch flanges. The vent opening is 10-3/4 inches high and 4-3/4 inches deep, for 48.1 square inches of free area. Per EZ Plenum's spec sheet, the 10 inch model uses a 9 inch round collar, so check your duct size before ordering.
Finishes
Choose the standard mill (galvanized) finish, or a painted finish in Arctic White, Obsidian Black, Terra Brown, Heritage Bronze, Molten Copper or Evergreen to match the roof.
Installation note
Flash and seal the base following the roofing manufacturer's method. EZ Plenum does not guarantee these roof vents to be leak-proof in every weather condition, including wind-driven rain and severe storms.
Frequently asked questions
What duct connects to the EZRVCD10? The collar is 9 inches in diameter.
Does it have a damper? Yes, a backdraft damper is built in.
Is the screen removable? Yes, the birdscreen comes out for cleaning.
What is it made of? 26 gauge G-90 galvanized steel with a flanged base.
White Paper
