Description
Product Summary
Harris Stay-Brite 8 (part SB861) is a lead-free, silver-bearing tin solder on a 1 lb spool of 1/8 in solid wire. It is used where a stronger joint than standard soft solder is needed but brazing heat is not wanted, including refrigeration, HVAC and plumbing work.
It melts at about 430°F to 535°F, so it can be applied with an air-acetylene or propane torch without the heat of brazing, which helps protect nearby components. Stay-Brite 8 bonds to copper, brass, stainless steel and most other metals, and it is listed to NSF/ANSI 51 for food service equipment. A soldering flux is required.
Before you order, make sure solder is right for the joint and pressure rating of your system. If you are not sure which alloy fits the job, call us at 1.888.509.3391 and we will help.
Key Features
- Lead free: Silver-bearing tin solder
- Melting range: About 430°F to 535°F
- Format: 1/8 in solid wire, 1 lb spool
- Genuine Harris part: Part number SB861, factory new
Frequently Asked Questions
Is this a genuine Harris product?
Yes. This is the Harris SB861, factory new from The Harris Products Group.
Do I need flux?
Yes. Clean the joint and use a soldering flux made for silver-bearing solder.
Can I use solder instead of brazing on refrigerant lines?
Follow the equipment manufacturer's requirements. Many refrigerant connections, especially on high-pressure refrigerants, call for brazing rather than soldering.
Should a professional do this work?
Yes. Brazing and soldering on HVAC and refrigeration systems should be done by a trained technician using proper ventilation, protective equipment and a nitrogen purge where required, following the codes that apply where you work.
