Description
The Harvia Cilindro electric sauna heater contains a massive amount of stones. Thanks to the grate-like outer shell, each bather can adjust the nature of the steam: soft when throwing water onto the side of the heater and sharp when throwing water straight on top of the stone pillar. Cilindro is impressive to both look at and experience.
The Harvia CILINDRO PC110E is a 10.5 kW heater sized for sauna rooms of 141-636 cubic feet. It runs on 240V 1-phase power and draws 43.75 A on a 2x30A circuit. Stone capacity is 264 lbs (119.7 kg), and the maximum sauna temperature is 194 °F (90 °C).
In the box: Sauna Heater, Temperature Sensor, Installation and Operation Manual, 1-Year Limited Warranty (Consumer Use) and 1-Year Limited Warranty (Commercial Use).
Required for operation (sold separately): 264 lbs of Split-Face Sauna Stones (Qty 6 x 44 lbs of 5-10cm stones), Xenio Digital Control.
Key Features:
- Side-wall or corner of room install
- Stainless steel construction
- 10.5kW
- For sauna rooms from 141 to 636 cu. ft.
- Requires a minimum of 264lbs of stones (6 box-AC3000)
- Stainless steel elements
- Direct rock-to-heating element contact
- Industrial grade, serviceable heating elements
- Designed, engineered, and made in Finland
- Limited 1-year warranty (consumer use) and limited 1-year warranty (commercial use)
Frequently Asked Questions
What size sauna is the Harvia CILINDRO PC110E for?
It is rated for sauna rooms of 141-636 cu. ft. Rooms with glass walls or high ceilings may need the next size up.
What electrical service does the CILINDRO PC110E need?
240V 1-phase, 43.75 A, on a 2x30A breaker. It must be hardwired by a licensed electrician.
What else do I need to run the CILINDRO PC110E?
264 lbs of Split-Face Sauna Stones (Qty 6 x 44 lbs of 5-10cm stones), Xenio Digital Control.
White Paper
