Description
Product Summary
The Honeywell Residential H6062A1000 is a control board from Honeywell Residential, described by the manufacturer as: 24V premier white HumidPro digital Humidity/Dehumidity control wall or duct mount includes outdoor sensor manual Mode: 10% to 90% RH% (Adjustable) auto Mode: 10% to 60% RH% (35% Default). It is rated for 24V. It replaces H600.
A control board coordinates the operation of the equipment, switching the motors, valves and safety circuits based on thermostat calls and sensor inputs. Replace a board with burnt traces or relays, one that does not respond to correct inputs, or one that shows incorrect fault codes after its sensors test good.
Before you order, match H6062A1000 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Honeywell Residential part: Manufacturer part number H6062A1000, factory new.
- Voltage: 24V.
- Cross-reference: Replaces H600.
- Includes: Outdoor Sensor Manual Mode: 10% to 90% RH% (Adjustable) Auto Mode: 10% to 60% RH% (35% Default).
Frequently Asked Questions
Is this a genuine Honeywell Residential part?
Yes. This is the Honeywell Residential H6062A1000, a factory-new control board from Honeywell Residential.
How do I make sure it fits my equipment?
Compare H6062A1000 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the H6062A1000 replace?
The Honeywell Residential H6062A1000 replaces H600.
Do I need to set anything on a new board?
Many boards have DIP switches or jumpers for timing, model or capacity. Set them to match the original board or the equipment's instructions.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
