Description
Product Summary
The Honeywell Residential S8701A1026 is an ignition module from Honeywell Residential, described by the manufacturer as: direct spark ignition control. 1 trial for ignition with 21 sec trial time. two rod. It is used with direct spark ignition systems. It replaces S87C1030.
An ignition module runs the ignition sequence on a gas appliance: it powers the igniter, spark or pilot, opens the gas valve and proves flame within a set trial time, locking out if flame is not detected. Typical signs of a failed module are no spark or igniter glow during a call for heat, a gas valve that never receives voltage, or repeated lockouts after the flame sensor, pressure switch and wiring have been checked.
Before you order, match S8701A1026 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Honeywell Residential part: Manufacturer part number S8701A1026, factory new.
- Ignition Type: Direct Spark.
- Cross-reference: Replaces S87C1030.
- Part type: Ignition Module.
Frequently Asked Questions
Is this a genuine Honeywell Residential part?
Yes. This is the Honeywell Residential S8701A1026, a factory-new ignition module from Honeywell Residential.
How do I make sure it fits my equipment?
Compare S8701A1026 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the S8701A1026 replace?
The Honeywell Residential S8701A1026 replaces S87C1030.
Will a universal ignition module work on my equipment?
It will when the ignition type, voltage, flame sensing method and timings can be matched to the original control. Check the cross-references listed for this part.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
