Description
Product Summary
The Johnson Controls P32AC-8C is a pressure switch from Johnson Controls, described by the manufacturer as: differential pressure control 0.05" - 5.0" W.C. It replaces P32AC-8D.
A pressure switch proves that air, water or refrigerant pressure is where it should be before allowing the equipment to run. On furnaces it proves the inducer's draft; on boilers and steam systems it controls or limits the operating pressure. Replace a switch that does not close with the correct pressure applied, or that opens and closes erratically. Check hoses, ports and venting first.
Before you order, match P32AC-8C to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Johnson Controls part: Manufacturer part number P32AC-8C, factory new.
- Cross-reference: Replaces P32AC-8D.
- Part type: Pressure Switch.
- Ready to ship: In stock with live quantities shown on this page.
Frequently Asked Questions
Is this a genuine Johnson Controls part?
Yes. This is the Johnson Controls P32AC-8C, a factory-new pressure switch from Johnson Controls.
How do I make sure it fits my equipment?
Compare P32AC-8C with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the P32AC-8C replace?
The Johnson Controls P32AC-8C replaces P32AC-8D.
What do the numbers on a pressure switch mean?
They are the pressures at which the switch closes and opens. Replace it with a switch that has the same set points.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
