Description
Product Summary
The Maxitrol 325-5-1/2" is a gas pressure regulator from Maxitrol, described by the manufacturer as: 1/2" gas pressure regulator for up to 10 PSI use with R325E10 spring includes standard 4-12" spring & 12A39 vent limiter 325000 BTU. It is sized for 1/2" connections. It replaces 325-5A-1/2".
A gas pressure regulator reduces the supply pressure to the steady pressure the appliance or gas line was designed for, so the burner fires at its rated input no matter how the incoming pressure changes. Replace a regulator that cannot hold its set outlet pressure, chatters or hums, vents gas, or causes burner flames to change when other appliances turn on.
Before you order, match 325-5-1/2" to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Maxitrol part: Manufacturer part number 325-5-1/2", factory new.
- Pipe Size: 1/2".
- Cross-reference: Replaces 325-5A-1/2".
- Includes: Standard 4-12" Spring & 12A39 Vent Limiter 325000 BTU.
Frequently Asked Questions
Is this a genuine Maxitrol part?
Yes. This is the Maxitrol 325-5-1/2", a factory-new gas pressure regulator from Maxitrol.
How do I make sure it fits my equipment?
Compare 325-5-1/2" with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 325-5-1/2" replace?
The Maxitrol 325-5-1/2" replaces 325-5A-1/2".
How do I choose the right regulator?
Match the capacity in BTU per hour, the pipe size, the inlet pressure and the outlet pressure range. The spring installed sets the outlet range; other springs are sold separately.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
