Description
Product Summary
The Rheem 62-22868-93 is an ignition module from Rheem, described by the manufacturer as: ignitor - hot surface ignition (HSI - silicon carbide. It is used with hot surface ignition systems. It replaces 62-22868-93-1PK 62-22868-82.
An ignition module runs the ignition sequence on a gas appliance: it powers the igniter, spark or pilot, opens the gas valve and proves flame within a set trial time, locking out if flame is not detected. Typical signs of a failed module are no spark or igniter glow during a call for heat, a gas valve that never receives voltage, or repeated lockouts after the flame sensor, pressure switch and wiring have been checked.
Before you order, match 62-22868-93 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Rheem part: Manufacturer part number 62-22868-93, factory new.
- Ignition Type: Hot Surface.
- Cross-reference: Replaces 62-22868-93-1PK 62-22868-82.
- Part type: Ignition Module.
Frequently Asked Questions
Is this a genuine Rheem part?
Yes. This is the Rheem 62-22868-93, a factory-new ignition module from Rheem.
How do I make sure it fits my equipment?
Compare 62-22868-93 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 62-22868-93 replace?
The Rheem 62-22868-93 replaces 62-22868-93-1PK 62-22868-82.
Will a universal ignition module work on my equipment?
It will when the ignition type, voltage, flame sensing method and timings can be matched to the original control. Check the cross-references listed for this part.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
