Description
Product Summary
The RIB RIBU1C is an igniter / flame sensor from RIB, described by the manufacturer as: SPDT enclosed pilot relay 10 amp 10-30VAC/dc/120VAC. It is rated for 30V. It replaces CVR-11C L39-103 RIB2401C.
Igniters, flame sensors, pilots and thermocouples handle the lighting and flame-proving side of a gas or oil burner. The igniter or pilot lights the gas, and the flame sensor, thermocouple or thermopile tells the control that flame is present. A cracked or weak igniter, a sooty pilot, or a flame sensor with a low microamp reading are common reasons a burner lights and then shuts off or never lights at all.
Before you order, match RIBU1C to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine RIB part: Manufacturer part number RIBU1C, factory new.
- Voltage: 30V.
- Cross-reference: Replaces CVR-11C L39-103 RIB2401C.
- Part type: Igniter / Flame Sensor.
Frequently Asked Questions
Is this a genuine RIB part?
Yes. This is the RIB RIBU1C, a factory-new igniter / flame sensor from RIB.
How do I make sure it fits my equipment?
Compare RIBU1C with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the RIBU1C replace?
The RIB RIBU1C replaces CVR-11C L39-103 RIB2401C.
Can I clean a flame sensor instead of replacing it?
Often, yes. Cleaning the rod restores the signal in many cases. Replace it if the porcelain is cracked or the signal stays low after cleaning and checking the ground.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
