Description
Product Summary
The Robertshaw RS9210 is a thermostat from Robertshaw, described by the manufacturer as: 24V/Millivolt Programmable/Non programmable digital multi stage Conventinal/Heat pump thermostat with 4.6 square inch backlit display 7 day 5-1-1 2 Heat/1 cool 45-90F. It is rated for 24V. It replaces RS321P.
A thermostat reads the room temperature and tells the heating and cooling equipment when to run. Matching the thermostat to the system's stages, heat pump or conventional setup and power source is the key to a correct replacement. Replace a thermostat that reads the wrong temperature, will not call for heat or cooling, has a blank display or does not support the equipment's stages.
Before you order, match RS9210 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Robertshaw part: Manufacturer part number RS9210, factory new.
- Voltage: 24V.
- Cross-reference: Replaces RS321P.
- Part type: Thermostat.
Frequently Asked Questions
Is this a genuine Robertshaw part?
Yes. This is the Robertshaw RS9210, a factory-new thermostat from Robertshaw.
How do I make sure it fits my equipment?
Compare RS9210 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the RS9210 replace?
The Robertshaw RS9210 replaces RS321P.
Will this thermostat work with my system?
Check the number of heating and cooling stages, whether the system is a heat pump or conventional furnace and air conditioner, and whether a common (C) wire is available if the thermostat needs one.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
