Description
Product Summary
The Schneider Electric MP-2150-500 is a zone valve actuator from Schneider Electric, described by the manufacturer as: 120V modulating actuator with transformer. and aux. switch. It is rated for 120V.
A zone valve actuator, also called a powerhead or power unit, is the motor that opens and closes a zone valve body. It mounts on the existing valve so the valve can be repaired without draining or cutting into the piping. Replace the actuator if it hums or clicks without moving the valve, is stuck open or closed, or its end switch no longer closes.
Before you order, match MP-2150-500 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Schneider Electric part: Manufacturer part number MP-2150-500, factory new.
- Voltage: 120V.
- Part type: Zone Valve Actuator.
- Ready to ship: In stock with live quantities shown on this page.
Frequently Asked Questions
Is this a genuine Schneider Electric part?
Yes. This is the Schneider Electric MP-2150-500, a factory-new zone valve actuator from Schneider Electric.
How do I make sure it fits my equipment?
Compare MP-2150-500 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
Will this actuator fit my valve?
Match the valve series and part numbers listed for this actuator, along with the voltage, normal position and end switch configuration.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
