Description
Single head adjustable-output metering pump from the Classic Series designed for chemical injection and water treatment tasks. It meters solution for applications such as disinfection, pH control, corrosion and scale control, and oxidation for iron, manganese, or hydrogen sulfide removal. The pump is used in water conditioning, industrial process, cooling towers, wastewater, irrigation, horticulture, and metal finishing; output is set by motor speed, feed-rate control, and tube size.
Quick Answer: What Is the Stenner 85MJL5A1STAA?
The Stenner 85MJL5A1STAA is a automatic chemical feeder: Stenner 85 Series 85 gpd 120V 25 psi Peristaltic Pump, 1/4". It is brand new, ships in 1-2 business days, and is backed by the Stenner manufacturer warranty.
Stenner 85MJL5A1STAA Specifications
| Brand | Stenner |
|---|---|
| Equipment Type | Automatic Chemical Feeder |
| Model Number | 85MJL5A1STAA |
Key Features
- Adjustable output 5%–100% via external dial
- 2.5% incremental feed-rate control
- 20:1 turndown ratio for wide flow range
- QuickPro pump head enables tool-free tube replacement
- Three detachable components: motor, feed-rate control, pump head
- Interchangeable heads and tubes to convert models
How It Works
Chemical feeders and controllers deliver sanitizer and pH adjusters consistently. Tab chlorinators and floaters dissolve tablets at a controlled rate, automatic feeders and peristaltic pumps meter liquid chemicals, and controllers measure ORP and pH to tell feeders when to run. Storage and containment products keep chemicals separated, contained and safe.
How to Choose the Right Automatic Chemical Feeder
- Size feeders to the pool volume and chemical demand.
- Confirm the chemical the feeder is rated for (trichlor tablets, liquid chlorine, acid).
- For controllers, check probe types, outputs and alarms needed for your health code.
- Choose containment sized for the containers you store.
If you are replacing an existing part, the fastest way to confirm compatibility is to match the brand and model number on the old equipment. Send us the model number or a photo of the label and our team will help confirm the 85MJL5A1STAA is the right fit before you order.
Installation and Safety
Install inline chlorinators after the heater with a check valve to protect equipment. Never mix chemicals, and never put cal-hypo in a trichlor feeder; the reaction can be violent. Follow the chemical manufacturer's safety data sheet and local codes.
Maintenance Tips
- Inspect feeder lids, O-rings and tubing regularly.
- Calibrate pH and ORP probes on schedule.
- Store chemicals cool, dry, ventilated and separated by type.
- Replace worn peristaltic tubes promptly.
What's Included
This listing is for the Stenner 85MJL5A1STAA as described in the specifications above. Plumbing, wiring, unions and accessories are not included unless they are listed in the product name or specifications.
Built for Homeowners, Pool Pros and Property Managers
- Homeowners: match your existing model number, then reach out if you want a second set of eyes on compatibility before you order.
- Pool service pros and builders: order quickly, track every shipment, and reorder common parts for your routes and builds.
- Property managers and commercial pools: standardize equipment across properties and plan replacements with help from our team.
Frequently Asked Questions About the Stenner 85MJL5A1STAA
Can I use any tablets in my chlorinator?
Use only the chemical the feeder is rated for, usually trichlor tablets. Never mix chemical types.
Where should a chlorinator be installed?
After the filter and heater, with a check valve so concentrated chlorine cannot back up into equipment.
Do controllers replace testing?
No. Test water regularly to verify controller readings.
Is this the genuine Stenner part?
Yes. It is brand new Stenner equipment (model 85MJL5A1STAA) covered by the manufacturer warranty. Warranty terms vary by product and application; see the manufacturer documentation or ask our team.
