Description
Product Summary
The Supco CO1000 Carbon Monoxide Analyzer is a professional-grade replacement part from Supco (Sealed Unit Parts Co.), a trusted name in HVAC/R and appliance parts since 1945. Measure Carbon Monoxide quickly and easily in working and living environments.
Indoor air quality meters measure carbon monoxide, carbon dioxide, temperature, and humidity so technicians and building owners can verify ventilation, combustion safety, and occupant comfort.
Key Features
- 9V Battery (included)
- Above 200PPM, the beeper sounds continuously
- Audible alarm
- Auto power off
- Automatic calibration
- Backlit LCD
- From 35PPM to 200PPM, the beeper sounds periodically
- Max hold and data hold
Specifications
| Brand | Supco |
|---|---|
| Part Number | CO1000 |
| Part Type | IAQ Meter |
| Measurement Range | 0 to 1000 PPM |
| Measurement Resolution | 1 PPM |
| Accuracy | 5% or ± 10 PPM |
| Warm Up Period | < 2 Seconds |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -22°F to 140°F (-30°C to 60°C) |
| Operating Humidity | 0-99% RH (non-condensing) |
| Auto Power Off | After 15 minutes of inactivity |
| Typical Sensor Life | 3 years |
| Sensor Type | Stabilized electrochemical gas-specific (CO) |
Cross Reference
The Supco CO1000 is a direct replacement for the following OEM and competitor part numbers. Always verify ratings and fit against the original part before installing.
| Replaces Part # | Manufacturer | Description |
|---|---|---|
| CO71A | UEI® | Carbon Monoxide |
| MA-12830A | MA-Line® | Carbon Monoxide |
Frequently Asked Questions
How do I access the battery compartment?
Remove the blue boot, then remove the battery cover located on the back.
How do I 'zero out' the meter?
Press & hold the Backlight button for 8 seconds.
Can the sensor be replaced?
No, if the sensor goes bad, the entire unit needs to be replaced.
White Paper
What's Included
- (1) Supco CO1000 Carbon Monoxide Analyzer
Safety: Always disconnect power and follow lockout/tagout procedures before servicing electrical components. Installation should be performed by a qualified technician.
