Name: Supco VG60 Vacuum Gauge
Brand: Supco
SKU: VG60
Price: 296.58 USD
Availability: InStock

Supco VG60 Vacuum Gauge

Description

Product Summary

The Supco VG60 Vacuum Gauge is a professional-grade replacement part from Supco (Sealed Unit Parts Co.), a trusted name in HVAC/R and appliance parts since 1945. 10 segment color coded LED display provides fast response, easy to view vacuum measurements.

Vacuum gauges for verifying evacuation and confirming a dry, tight system before charging.

Key Features

Cleaning port provides quick cleaning and drying of sensor
Convenient built-in hanger
Easy to clean sensor (use isopropyl alcohol)
Easy to read color coded LED display
Low battery indicator
Reads vacuum in microns
Single switch operation
Soft case included
WARNING: Prop 65 info

Specifications

Brand	Supco
Part Number	VG60
Part Type	Vacuum Gauge
Sensor type	Thermistor
Connector type	Standard 1/4" male flared fitting
Vacuum range	50-5,000 microns
Parameter scale	microns
Operating temperature range	35°F to 125°F (2°C to 52°C)
Overpressure	500 psi max (20 Bar)
Power source	9 V battery (not included)
Fitting	1/4" SAE Flare Fitting , 45° thread

Frequently Asked Questions

How do I get an instruction manual?
See the White Paper section on this page.

What is the maximum operating pressure of the VG vacuum gauges?
500 PSI

What is the maximum amount of turns to calibrate?
15 turns

What is the accuracy?
The LED guarantees that it is in calibration when the light is lit, that it will pass that level of vacuum.

When the VG60 was initially turned on it read 5000 microns and then went down to 50 microns and stayed there?
Adjust the ambient temperature adjustment. Insert a screwdriver into the opening at the side of the case, locate the screw and make the adjustment until only the atmosphere and slide switch lamp goes on. Do not overturn the screw, it may turn off the atmosphere lamp. (pot has a 15 max turn)

Related Parts

Commonly used with: Supco VGC.

White Paper

Supco VG60 Installation & Operation Manual (PDF)

What's Included

(1) Supco VG60 Vacuum Gauge

Safety: Always disconnect power and follow lockout/tagout procedures before servicing electrical components. Installation should be performed by a qualified technician.

Extra Information

Find your comfort-ready size with confidence

Get a fast, learning-friendly estimate for tons and BTUs, then review it with a Pro to dial in the perfect fit for your home.

Quick sizing snapshot

Enter your home size and a few basics to see a quick HVAC365 sizing snapshot you can review with a Professional.

Home size (sq ft)

Enter at least 100 sq ft.

Use conditioned square footage only; skip garages and unfinished basements.

Climate

We’ll auto-detect for U.S. visitors.

Home type

Select your home type.

Shared walls and insulation levels change the load—pick what matches your structure.

System type

Choose a system type.

Match the system to your ductwork, fuel, or preferred heat source for best comfort.

This is a sizing estimate for general guidance only. Always confirm final size, duct design, and fuel type with a Professional before purchasing equipment or pulling permits.

Brand:

Supco

Weight:

1.00 LBS

Safety Information:

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Prop 65 Warning:

Yes

Part Type:

Vacuum Gauge

Sensor type:

Thermistor

Connector type:

Standard 1/4" male flared fitting

Vacuum range:

50-5,000 microns

Parameter scale:

microns

Operating temperature range:

35°F to 125°F (2°C to 52°C)

Overpressure:

500 psi max (20 Bar)

Power source:

9 V battery (not included)

Fitting:

1/4" SAE Flare Fitting , 45° thread

Please Note: To validate the manufacturer's warranty, equipment must be installed by a qualified licensed professional in accordance with local codes and the manufacturer's installation requirements.