Name: System Sensor RTS2-AOS Multi Signaling Accessory
Brand: System Sensor
SKU: RTS2-AOS
Price: 389.82 USD
Availability: InStock

System Sensor RTS2-AOS Multi Signaling Accessory

Description

Product Summary

The System Sensor RTS2-AOS Multi Signaling Accessory is a professional-grade replacement part from System Sensor. The RTS2-AOS multi-signaling accessories are used along with InnovairFlex® 4-wire conventional duct smoke detectors. These include a key switch that can be used to select one of two connected sensors to be tested/reset, or both by a push button switch.

Duct smoke detectors sense smoke in the HVAC air stream and shut down air handlers to keep smoke from spreading through a building, as required by many mechanical and fire codes for systems above 2,000 CFM. This group includes detector housings, sampling tubes, remote test stations, annunciators, and accessories.

Key Features

Includes Add-on Strobe (AOS)
Signaling accessory for 4-wire conventional duct smoke detectors.

Specifications

Brand	System Sensor
Part Number	RTS2-AOS
Part Type	Duct Smoke Detector
Operating Voltage	20 to 29 VDC
Temperature Range	14°F to 140°F (-10°C to 60°C)
Relative Humidity	95% RH (Non-condensing)
Sound Level	85 dB @ 10 Feet
Wire Gauge	14 to 22 AWG
Audible Alarm	85dBa @ 10 Feet

White Paper

System Sensor RTS2-AOS Product Specification Sheet (PDF)

What's Included

(1) System Sensor RTS2-AOS Multi Signaling Accessory

Safety: Always disconnect power and follow lockout/tagout procedures before servicing electrical components. Installation should be performed by a qualified technician.

Extra Information

Find your comfort-ready size with confidence

Get a fast, learning-friendly estimate for tons and BTUs, then review it with a Pro to dial in the perfect fit for your home.

Quick sizing snapshot

Enter your home size and a few basics to see a quick HVAC365 sizing snapshot you can review with a Professional.

Home size (sq ft)

Enter at least 100 sq ft.

Use conditioned square footage only; skip garages and unfinished basements.

Climate

We’ll auto-detect for U.S. visitors.

Home type

Select your home type.

Shared walls and insulation levels change the load—pick what matches your structure.

System type

Choose a system type.

Match the system to your ductwork, fuel, or preferred heat source for best comfort.

This is a sizing estimate for general guidance only. Always confirm final size, duct design, and fuel type with a Professional before purchasing equipment or pulling permits.

Brand:

System Sensor

Weight:

3.00 LBS

Safety Information:

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Prop 65 Warning:

Yes

Part Type:

Duct Smoke Detector

Operating Voltage:

20 to 29 VDC

Temperature Range:

14°F to 140°F (-10°C to 60°C)

Relative Humidity:

95% RH (Non-condensing)

Sound Level:

85 dB @ 10 Feet

Wire Gauge:

14 to 22 AWG

Audible Alarm:

85dBa @ 10 Feet

Please Note: To validate the manufacturer's warranty, equipment must be installed by a qualified licensed professional in accordance with local codes and the manufacturer's installation requirements.