Waterway Renegade Gunite Skimmer, 2 Port, Round Lid, 2" Socket/2-1/2" Spigot, White | 540-6410

Renegade Gunite skimmer for in-ground pools, designed to collect surface debris and connect to pool plumbing. It fits gunite installations and accepts common PVC fittings for glue-joint connections. The skimmer includes a large locking basket and a spring-loaded weir door for easier access and maintenance.

Waterway 540-6410 Specifications

Key Features

• 2" socket is 2-1/2" spigot for increased flow
• 1-1/2" socket is 2" spigot for easier plumbing
• 1/2" socket for overflow hose connection
• PVC sockets for stronger glue joints
• Large locking skimmer basket for secure debris capture
• Spring-loaded weir door for easy access and replacement
• High flow rate up to 75 GPM
• Includes Lock-Down vacuum plate and extension collar
• Optional float valve and optional skimmer test kit available

How It Works

Drains, skimmers, return inlets, jets and plugs are the plumbing fittings where water leaves and returns to the pool or spa. Skimmers pull surface debris, main drains draw from the deep end, returns and jets push filtered water back, and plugs seal lines for winterizing or service. Suction covers must meet current VGB and ANSI/APSP-16 standards to prevent entrapment.

How to Choose the Right Pool Skimmer

• Match the pool type (gunite/concrete, vinyl liner, fiberglass) and the existing fitting brand and size.
• For suction covers, confirm the flow rating, mounting pattern and service life marked on the cover.
• For jets and returns, match thread size and insert style.
• For plugs, match pipe size and plug type (threaded, expansion or winterizing).

If you are replacing an existing part, the fastest way to confirm compatibility is to match the brand and model number on the old equipment. Send us the model number or a photo of the label and our team will help confirm the 540-6410 is the right fit before you order.

Installation and Safety

Suction outlet covers must be installed exactly as certified, with the correct screws and sump. Replace any cover that is cracked, loose, missing screws or past its expiration date. Structural fittings in a pool shell should be installed by a qualified pool builder.

Maintenance Tips

• Inspect drain covers regularly and replace at the marked expiration date.
• Check skimmer baskets and weirs weekly.
• Lubricate O-rings on threaded fittings.
• Use winterizing plugs properly in freezing climates.

What's Included

This listing is for the Waterway 540-6410 as described in the specifications above. Plumbing, wiring, unions and accessories are not included unless they are listed in the product name or specifications.

Built for Homeowners, Pool Pros and Property Managers

• Homeowners: match your existing model number, then reach out if you want a second set of eyes on compatibility before you order.
• Pool service pros and builders: order quickly, track every shipment, and reorder common parts for your routes and builds.
• Property managers and commercial pools: standardize equipment across properties and plan replacements with help from our team.

White Paper

• Waterway 540-6410 Brochure (PDF)
• Waterway 540-6410 Specification Sheet (PDF)
• Waterway 540-6410 Installation Guide (PDF)

Frequently Asked Questions About the Waterway 540-6410

Does my drain cover expire?

Yes. VGB-compliant covers are marked with a service life; replace them by that date or sooner if damaged.

How do I match a jet or return fitting?

Check the brand, thread size and insert style of the existing fitting.

Why is my skimmer not pulling well?

Check for a clogged basket, low water level, a stuck weir or a valve setting that favors the main drain.

Is this the genuine Waterway part?

Yes. It is brand new Waterway equipment (model 540-6410) covered by the manufacturer warranty. Warranty terms vary by product and application; see the manufacturer documentation or ask our team.