Description
Smart Electric 75 Amp 3 Pole Contactor, 120V Coil
The Smart Electric SE3719M is a 3-pole definite purpose contactor rated 75 full load amps and 90 resistive amps, with a 120 volt coil. Definite purpose contactors are the switches inside air conditioners, heat pumps, refrigeration condensing units and other equipment that let a low-current control signal start and stop the compressor and fan motors. A 120 volt coil is used where the control circuit runs on line voltage, common in commercial refrigeration and some packaged equipment. Three poles switch all three legs of a three-phase load, or let one contactor handle separate single-phase loads.
Choosing a replacement
Match the coil voltage, the number of poles and the full load amp rating to the original contactor or the unit wiring diagram, and never go below the original amp rating. Locked rotor ratings for this model are 450/375/300 amps. Turn the power off at the disconnect and label the wires before swapping the contactor.
