Description
Product Summary
The Suntec J4PBB10008M is an oil pump from Suntec, described by the manufacturer as: oil pump 1725/3450 RPM. It is 3450 RPM. It replaces J4PB-B1000G J2BB100 J2BC100 J3BB100 J3BB200 J2CB100 J4PB100 J4CBB1000 H2BB100 H3BB100 H3BB200 H3BB300 H3PBB100 H5PB100 HA2BB100 H2PB100-4 J4CBB-1000 H3DB1022A H3PB100 J.
An oil pump, also called a fuel unit, draws oil from the tank and delivers it to the nozzle at a steady set pressure. Pumps are matched by stages, speed, rotation and port configuration. Replace a pump that cannot hold pressure, drips after shutdown, is noisy or has a failed seal.
Before you order, match J4PBB10008M to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine Suntec part: Manufacturer part number J4PBB10008M, factory new.
- Speed: 3450 RPM.
- Cross-reference: Replaces J4PB-B1000G J2BB100 J2BC100 J3BB100 J3BB200 J2CB100 J4PB100 J4CBB1000 H2BB100 H3BB100 H3BB200 H3BB300 H3PBB100 H5PB100 HA2BB100 H2PB100-4 J4CBB-1000 H3DB1022A H3PB100 J.
- Part type: Oil Pump.
Frequently Asked Questions
Is this a genuine Suntec part?
Yes. This is the Suntec J4PBB10008M, a factory-new oil pump from Suntec.
How do I make sure it fits my equipment?
Compare J4PBB10008M with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the J4PBB10008M replace?
The Suntec J4PBB10008M replaces J4PB-B1000G J2BB100 J2BC100 J3BB100 J3BB200 J2CB100 J4PB100 J4CBB1000 H2BB100 H3BB100 H3BB200 H3BB300 H3PBB100 H5PB100 HA2BB100 H2PB100-4 J4CBB-1000 H3DB1022A H3PB100 J.
Single stage or two stage?
Single-stage pumps are used when the tank is at or above the burner. Two-stage pumps provide extra lift for tanks below the burner.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
