TradePro 3/8" ODF Sweat Bi-Directional Heat Pump Filter Drier - 8 Cu. In. | TP-083S

TradePro

5 Star RatingLeave a review
No reviews yet Write a Review
SKU:
TP-083S
Your Price $0.00

Detecting ZIP...
Est. Net Incentive Amount: $0.00
We could not detect your ZIP automatically. Enter your ZIP to check incentives.
Available Incentives
$0.00
Selected Incentives
0
Unpriced Programs
0
Estimates assume eligibility; programs and amounts can change.
UPC:
687152298631
Condition:
New
Width:
3.00 (in)
Height:
3.00 (in)
Depth:
7.00 (in)

Questions about TradePro 3/8" ODF Sweat Bi-Directional Heat Pump Filter Drier - 8 Cu. In. | TP-083S?

Contact us for advice or additional information; our product specialists are here to help!

SupplierGateway® Certified i
Minority-Owned • Small Business

Fast Shipping

Customer Support

Warranty Coverage

Financing Available

$47.78

  • $9.95 Flat-Rate Shipping
208 in stock • Ships in 1-2 Business Days
Overview

TradePro 3/8" ODF Sweat Bi-Directional Heat Pump Filter Drier - 8 Cu. In. | TP-083S

TradePro TP-083S 3/8" ODF sweat 8 cubic inch bi-directional heat pump filter drier, generic line drawing
Product details

Description

TradePro TP-083S Bi-Directional Heat Pump Filter Drier

The TradePro TP-083S is an 8 cubic inch bi-directional filter drier built for heat pumps, where refrigerant reverses direction between heating and cooling. Internal check valves let it filter in both directions, so the system stays protected in every mode without needing two driers. It has 3/8" ODF copper sweat connections made to be brazed directly into the line.

Size the drier to the system tonnage and line size, and install it as close to the component it protects as practical. Like any filter drier, it should be brazed or connected with the system evacuated and protected from moisture until it is sealed in.

Key Features

  • Filters and dries in both directions, made for heat pump liquid lines
  • 8 cubic inch desiccant capacity for moisture and acid removal
  • Copper ODF sweat ends for a leak-tight brazed joint
  • Compatible with CFC, HCFC and HFC refrigerants

Frequently Asked Questions

Can I use a standard liquid line drier on a heat pump?

A standard drier only filters in one direction. On a heat pump the flow reverses, so a bi-directional drier like this one is the right choice when the drier sits in the common liquid line.

When should the drier be replaced?

Replace the filter drier any time the refrigerant circuit is opened for a repair, such as a compressor, coil or metering device change.

Comfort for the people who live there

The right equipment keeps the rooms you live in steady and quiet, whether it's dinner in the kitchen or a weekend project in the garage.

Specifications

Extra Information

Find your comfort-ready size with confidence

Get a fast, learning-friendly estimate for tons and BTUs, then review it with a Pro to dial in the perfect fit for your home.

Brand:
TradePro
Width:
3.00 (in)
Height:
3.00 (in)
Depth:
7.00 (in)
Weight:
2.00 LBS
Part Type:
Filter Drier / Sight Glass
Drier Type:
Bi-Directional (Heat Pump)
Unit size cubic inch:
8
Connection Size:
⅜"
Connection Type:
ODF
Refrigerants:
CFC, HCFC and HFC refrigerants
Shell Material:
Steel
Manufacturer Part Number:
TP-083S
Prop 65 Warning:
Yes
Safety Information:
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Flow Direction:
Bi-directional (heat pump)
Please Note: To validate the manufacturer's warranty, equipment must be installed by a qualified licensed professional in accordance with local codes and the manufacturer's installation requirements.

2023 Energy Standards

Department of Energy (DOE) State Regulations – Effective 2023

Click the link below to view the energy standards applicable to your region.

DOE State Standards Document

Department of Energy (DOE) State Regulations – Effective 2023

Click the link below to view the energy standards applicable to your region.

DOE State Standards Document

Documents & warranty
Warranty
1 Year Parts
Frequently asked questions
What warranty comes with the TP-083S?
1 Year Parts
Who makes the TP-083S?
The TP-083S is made by TradePro.