Description
Product Summary
The York S1-02544124000 is a gas valve from York, described by the manufacturer as: gas valve WR "G" 2 stage. It replaces S1-02538915000 S1-02538915000 S1-025-35394-000 S1-02535395000.
A gas valve controls the flow of gas to the burner and, on pilot models, to the pilot. It opens only when the ignition system or thermocouple tells it the appliance is ready, regulates the outlet pressure to the burner and closes the moment the call for heat ends or a safety fails. Common signs of a failed gas valve are an igniter or spark that never lights the burner even though the valve receives voltage, a pilot that will not stay lit, manifold pressure that cannot be set, or a burner that keeps firing after the thermostat is satisfied.
Before you order, match S1-02544124000 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine York part: Manufacturer part number S1-02544124000, factory new.
- Cross-reference: Replaces S1-02538915000 S1-02538915000 S1-025-35394-000 S1-02535395000.
- Part type: Gas Valve.
- Ready to ship: In stock with live quantities shown on this page.
Frequently Asked Questions
Is this a genuine York part?
Yes. This is the York S1-02544124000, a factory-new gas valve from York.
How do I make sure it fits my equipment?
Compare S1-02544124000 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the S1-02544124000 replace?
The York S1-02544124000 replaces S1-02538915000 S1-02538915000 S1-025-35394-000 S1-02535395000.
Can I convert this gas valve between natural gas and LP?
Only if the valve is listed as convertible and the correct conversion kit and burner orifices are used. Gas conversions must be done by a qualified technician following the appliance manufacturer's instructions.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
