Description
Product Summary
This First Co 2.5-ton through-the-wall split system pairs the 30WCX2BA200F WCX2 Series through-the-wall condensing unit with the 30HXS0502UBV000AAF HXS Series horizontal uncased ceiling fan coil. The pairing is AHRI certified under reference number 216775760, rated at 25,600 BTU/h of cooling with 11.7 SEER2 and 10.0 EER2.
This is the classic layout for condos, apartments and hotel rooms where the condenser sits in an exterior wall sleeve and the indoor unit hangs above a ceiling or soffit, usually over the entry hall or a closet. Replacing both halves with a matched First Co system keeps the existing wall sleeve, ceiling opening and line set routing in play, which avoids costly remodeling.
The uncased fan coil is built for installs where the unit is enclosed in framing or a soffit. If you need a finished ceiling installation, add the First Co 9EHX02 ceiling enclosure and an access panel from the options on this page. The 30WCX2BA200F uses the BA cabinet, about 32 in tall by 24 in wide, so measure your existing wall sleeve before ordering.
Key Features
- AHRI certified match: reference 216775760, 25,600 BTU/h, 11.7 SEER2 and 10.0 EER2.
- Through-the-wall condenser: WCX2 Series single-stage scroll compressor in the BA cabinet, built for exterior wall sleeves.
- Horizontal ceiling fan coil: HXS uncased unit with a PSC blower, factory non-bleed TXV and 5 kW of electric heat.
- R-454B refrigerant: factory refrigerant sensor for A2L refrigerant.
Ideal Applications
Condominiums, apartments, hotels and multi-family buildings with through-the-wall condensers and ceiling or soffit mounted fan coils, including direct replacements of existing First Co systems.
Frequently Asked Questions
Is this system AHRI matched?
Yes. The 30WCX2BA condenser and the 30HXS fan coil with PSC blower and TXV are AHRI certified together under reference 216775760.
What is the difference between cased and uncased?
A cased fan coil comes factory installed in a ceiling enclosure. An uncased fan coil is the bare unit for installs inside framing or a soffit, with the enclosure and access panel available separately.
Which cabinet size is the condenser?
The BA cabinet, about 32 in tall by 24 in wide. Match it to your existing wall sleeve opening.
Does the system include heat?
Yes. The fan coil has 5 kW of factory-installed electric heat. The condenser is cooling only.
White Paper
