Description
The Goodman 2.5 Ton 15.2 SEER2 80% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Horizontal R-32 (GLXS5BA3010 / GR9T800804BN / CHPTA3026B3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2.5-ton R-32 air conditioner, 80% AFUE two-stage gas furnace, and 2.5-ton horizontal cased evaporator coil for energy-efficient cooling and reliable heating.
Designed for horizontal installation, the system is suitable for attics, crawl spaces, and other limited-height installation areas. The furnace features two-stage heating and a multi-speed ECM blower motor, helping provide improved comfort, consistent airflow, and efficient operation.
Key Features
- 2.5 Ton Cooling Capacity – Delivers 30,000 BTU of residential cooling
- 15.2 SEER2 Efficiency – Supports energy-efficient cooling performance
- 80,000 BTU Gas Furnace – Provides dependable two-stage heating
- 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
- Horizontal R-32 Configuration – Suitable for attics, crawl spaces, and limited-height areas
- Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
- Matched 2.5 Ton Coil – Supports proper cooling capacity and system performance
System Components Included
- Goodman GLXS5BA3010 2.5 Ton 15.2 SEER2 R-32 Air Conditioner
- Goodman GR9T800804BN 80,000 BTU 80% AFUE Two-Stage Gas Furnace
- Goodman CHPTA3026B3 2.5 Ton Cased Horizontal R-32 Evaporator Coil
Compatibility & Installation Notes
The GLXS5BA3010 / GR9T800804BN / CHPTA3026B3 system is designed for residential horizontal applications. Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, and approved furnace venting must be confirmed before installation.
The complete equipment combination should also be checked against applicable AHRI matching data to verify its certified efficiency and performance ratings.
Installation Notes
- Verify compatibility with the existing horizontal ductwork
- Confirm electrical service and natural gas connection requirements
- Check the required refrigerant line sizes before installation
- Install approved furnace venting and proper evaporator-coil condensate drainage
- Use a compatible two-stage thermostat to access full staging functionality
- Confirm adequate installation and service clearances
- Verify the complete system’s AHRI-rated performance
- Installation should be completed by a qualified HVAC professional
Frequently Asked Questions
What is included in this Goodman HVAC system?
The package includes the GLXS5BA3010 air conditioner, GR9T800804BN gas furnace, and CHPTA3026B3 horizontal evaporator coil.
What is the cooling capacity of this system?
The system provides 2.5 tons or 30,000 BTU of cooling capacity.
Is the furnace single-stage or two-stage?
The Goodman GR9T800804BN is a two-stage gas furnace, allowing it to operate at a lower heating level during mild conditions and increase its output when additional heat is required.
Does this system require a two-stage thermostat?
A compatible two-stage thermostat is recommended to provide proper control over both furnace heating stages.
What is the approximate heating output?
With an 80% AFUE rating, the 80,000 BTU furnace provides approximately 64,000 BTU of usable heating output.
Where can a horizontal HVAC system be installed?
Horizontal systems are commonly installed in attics, crawl spaces, and other limited-height areas, subject to local codes and manufacturer clearance requirements.
Does this system use R-32 refrigerant?
Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant.
White Paper
- Goodman GLXS5B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9T80/GD9T80 Spec Sheet
- Goodman GR9T80/GD9T80 Installation Manual
- Goodman Evaporator Coil Spec Sheet
- Goodman CHPTA Coil Installation Manual
- Goodman GLXS5BA Repair Parts List (RP-G4347A)
- Goodman GR9T Repair Parts List (RP-G2355)
- Goodman CHPTA Repair Parts List (RP-4362)
