Goodman 2.5 Ton -16 SEER2 80% AFUE 100,000 BTU Gas Electric Air Conditioner Split System Horizontal R-32 | GLXS5BA3010 GR9S801005CX CHPTA3630C3

The Goodman 2.5 Ton 16 SEER2 80% AFUE 100,000 BTU Gas Electric Air Conditioner Split System Horizontal R-32 (GLXS5BA3010 / GR9S801005CX / CHPTA3630C3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2.5-ton R-32 air conditioner, 80% AFUE gas furnace, and 3-ton horizontal cased evaporator coil for energy-efficient cooling and reliable heating.

Designed for horizontal installation, the system features a single-stage gas furnace and a multi-speed ECM blower motor for consistent airflow and efficient operation. Its horizontal configuration makes it suitable for attics, crawl spaces, and other limited-height installation areas.

Key Features

• 2.5 Ton Cooling Capacity – Delivers 30,000 BTU of residential cooling
• 16 SEER2 Efficiency – Supports energy-efficient cooling performance
• 100,000 BTU Gas Furnace – Provides dependable single-stage heating
• 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
• Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
• Horizontal R-32 System – Suitable for attics, crawl spaces, and limited-height areas
• 3 Ton Evaporator Coil – Paired with the 2.5-ton condenser as part of the matched configuration

System Components Included

• Goodman GLXS5BA3010 2.5 Ton R-32 Air Conditioner
• Goodman GR9S801005CX 100,000 BTU 80% AFUE Single-Stage Gas Furnace
• Goodman CHPTA3630C3 3 Ton Cased Horizontal R-32 Evaporator Coil

Compatibility & Installation Notes

The GLXS5BA3010 / GR9S801005CX / CHPTA3630C3 system is intended for residential horizontal applications. Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, thermostat, and furnace venting must be confirmed before installation.

The evaporator coil has a larger nominal capacity than the outdoor condenser. This pairing may be used to achieve the listed efficiency rating, but the complete equipment combination should be verified using applicable manufacturer documentation and an AHRI-certified system match.

Because this system includes a 100,000 BTU furnace, a professional heating-load calculation is recommended to ensure the furnace is appropriately sized for the property.

Specifications

• System Type: Gas Electric Split System
• Cooling Capacity: 2.5 Ton / 30,000 BTU
• Evaporator Coil Capacity: 3 Ton
• Heating Input: 100,000 BTU
• Heating Output: Approximately 80,000 BTU
• Cooling Efficiency: 16 SEER2
• Furnace Efficiency: 80% AFUE
• Furnace Stages: Single-Stage
• Blower Motor: Multi-Speed ECM
• Refrigerant: R-32
• Installation Orientation: Horizontal

Installation Notes

• Verify compatibility with the existing horizontal ductwork
• Confirm electrical service and natural gas connection requirements
• Check the required refrigerant line sizes before installation
• Install approved furnace venting and proper evaporator-coil condensate drainage
• Perform a heating-load calculation to confirm appropriate furnace sizing
• Confirm the complete matched-system efficiency through AHRI documentation
• Installation should be completed by a qualified HVAC professional

Frequently Asked Questions

What is included in this Goodman HVAC system?

The package includes the GLXS5BA3010 air conditioner, GR9S801005CX gas furnace, and CHPTA3630C3 horizontal evaporator coil.

What is the cooling capacity of this system?

The air conditioner provides 2.5 tons or 30,000 BTU of cooling capacity.

Why does this system include a 3-ton evaporator coil?

The 3-ton evaporator coil may be paired with the 2.5-ton outdoor condenser to support airflow and achieve the specified efficiency rating. The complete combination should be verified as an approved AHRI match.

Is the furnace single-stage or two-stage?

The Goodman GR9S801005CX is a single-stage gas furnace that provides consistent heating output.

What does 80% AFUE mean?

It means approximately 80% of the furnace’s fuel is converted into usable heating energy, providing an estimated heating output of 80,000 BTU.

Where can a horizontal HVAC system be installed?

A horizontal system is commonly installed in an attic, crawl space, or another limited-height area, subject to applicable installation requirements.

Does this system use R-32 refrigerant?

Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant.