The Goodman 2 Ton 15.2 SEER2 92% AFUE 60,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 (GLXS4BA2410 / GR9S920603BN / CAPTA2422B3) is a complete residential heating and cooling solution designed for dependable year-round indoor comfort. This matched system combines a 2-ton R-32 air conditioner, cased evaporator coil, and 92% AFUE gas furnace, making it suitable for residential replacement and new-installation applications requiring an upflow configuration.

The Goodman GLXS4BA2410 outdoor air conditioner provides 2 tons (24,000 BTU) of cooling capacity. When matched with the specified indoor components, the system delivers a 15.2 SEER2 efficiency rating while using R-32 refrigerant. The single-stage cooling design provides straightforward, dependable operation for residential cooling applications.

Together, the GLXS4BA2410 / GR9S920603BN / CAPTA2422B3 combination provides an efficient solution for homeowners looking for 2-ton cooling, 60,000 BTU gas heating, 92% AFUE efficiency, R-32 refrigerant, and an upflow HVAC configuration.

Key Features

• Complete Gas Electric Split System – Includes air conditioner condenser, gas furnace, and cased evaporator coil
• 2 Ton Cooling Capacity – Provides approximately 24,000 BTU of nominal cooling capacity
• 15.2 SEER2 System Efficiency – Matched system configuration designed for efficient residential cooling
• 60,000 BTU Furnace Input – Provides dependable heating capacity for residential applications
• 92% AFUE Heating Efficiency – Converts a high percentage of fuel input into usable heating output
• Approximately 55,200 BTU Heating Output – Based on 60,000 BTU input and 92% AFUE
• R-32 Refrigerant – Designed around Goodman's current-generation R-32 refrigerant platform
• Single-Stage Cooling – Straightforward operation for dependable home cooling
• Single-Stage Gas Heating – Reliable furnace operation for consistent winter comfort
• ECM Blower Technology – Supports efficient airflow throughout the duct system
• Upflow System Configuration – Ideal for applications where conditioned air is supplied upward

System Components Included

Goodman GLXS4BA2410 Air Conditioner

• Model: GLXS4BA2410
• Nominal Capacity: 2 Ton
• Cooling Capacity: 24,000 BTU
• Matched System Efficiency: 15.2 SEER2
• Refrigerant: R-32
• Cooling Operation: Single Stage
• Electrical: 208/230V, Single Phase
• Application: Residential Split-System Air Conditioning

Goodman CAPTA2422B3 Evaporator Coil

• Model: CAPTA2422B3
• Type: Cased Evaporator Coil
• Application: Matched Indoor AC Coil
• Refrigerant: R-32 Compatible
• Configuration: Upflow / Downflow
• Purpose: Provides indoor heat transfer between the refrigerant system and conditioned airflow

Goodman GR9S920603BN Gas Furnace

• Model: GR9S920603BN
• Heating Input: 60,000 BTU
• AFUE: 92%
• Approximate Heating Output: 55,200 BTU
• Heating Stages: Single Stage
• Blower: ECM
• Primary Fuel: Natural Gas
• Configuration: Upflow / Horizontal
• Application: Residential Forced-Air Heating

System Specifications

Installation & Compatibility

This system is intended for upflow residential HVAC applications, where return air enters the lower portion of the furnace and conditioned air is discharged upward into the supply ductwork.

Before installation, the contractor should verify the home's heating and cooling load, ductwork dimensions, electrical service, gas supply, venting requirements, refrigerant piping, condensate drainage, clearances, and applicable local codes. Proper equipment sizing should be based on a professional load calculation rather than square footage alone.

Because this system uses R-32 refrigerant, installation, servicing, refrigerant handling, and compatible accessories should follow the applicable Goodman instructions and current codes. Professional HVAC installation is recommended.

Frequently Asked Questions

What components are included in this Goodman system?
The system consists of the GLXS4BA2410 outdoor air conditioner, GR9S920603BN gas furnace, and CAPTA2422B3 cased evaporator coil.

What size is this air conditioner?
The outdoor unit has a nominal cooling capacity of 2 tons, or approximately 24,000 BTU.

What is the system's cooling efficiency?
This matched configuration is rated at 15.2 SEER2.

How large is the furnace?
The furnace has a 60,000 BTU heating input rating.

What does 92% AFUE mean?
A 92% AFUE rating indicates that approximately 92% of the furnace's annual fuel energy is converted into usable heat under the rating methodology.

What is the approximate furnace output?
Based on the 60,000 BTU input and 92% AFUE rating, the nominal calculated output is approximately 55,200 BTU.

What refrigerant does this system use?
This system is designed for R-32 refrigerant.

Is this an upflow HVAC system?
Yes. This package is configured for an upflow installation, making it suitable for applications where conditioned air is delivered upward into the supply ductwork.