Description
Product Summary
The Goodman HKR3-20 is an HKR3 series electric heat kit for three-phase Goodman and Amana air handlers (ARUF, ARPF, ASPF) and MBR and MBVC modular blowers. It installs in the heater opening of the air handler or modular blower and adds electric heat: primary heat with an air conditioner, or auxiliary and emergency heat with a heat pump.
It is rated 19.5 kW (66,530 BTU/h) at 240V and about 14.63 kW (49,898 BTU/h) at 208V on a three-phase supply. The heat is split across two heater circuits, which can be fed separately or through single-point wiring where the equipment allows it.
Key Features
- 19.5 kW of electric heat: 66,530 BTU/h at 240V.
- 208/230V three-phase power: built for commercial and light-commercial three-phase service.
- Goodman OEM fit: made for three-phase air handlers and modular blowers.
- Two heater circuits: lets the thermostat bring heat on in stages.
Ideal Applications
- Auxiliary and emergency heat for a heat pump
- Primary heat for an air conditioner system
- Replacing a failed HKR3 heat kit
Frequently Asked Questions
Which equipment does the HKR3-20 fit?
It is made for three-phase Goodman and Amana air handlers (ARUF, ARPF, ASPF) and MBR and MBVC modular blowers. Before ordering, check that the HKR3-20 is listed in the heater kit table of your air handler or modular blower's installation manual.
How much heat does it put out at 208 volts?
It is rated 19.5 kW (66,530 BTU/h) at 240V and about 14.63 kW (49,898 BTU/h) at 208V on a three-phase supply.
What size wire and breaker do I need?
Use the minimum circuit ampacity (MCA) and maximum overcurrent protection (MOP) on the air handler or modular blower's rating plate with this kit installed, because the numbers change from one blower to the next. Have a licensed electrician or HVAC contractor make the connection and follow local code.
Can I use it with a heat pump?
Yes. With a heat pump it provides auxiliary heat in cold weather and emergency heat. With an air conditioner it is the main heat source.
White Paper
