Description
The MRCOOL GCIK-CL5T-AM is a complete 5-ton closed loop installation kit for GeoCool geothermal heat pumps, with a angled-pattern supply/return header. It packages the HDPE loop pipe, insulated circuit header, non-pressurized flow center, hose kit and heat transfer fluid needed to build and connect a closed ground loop, so the installer orders one part number instead of sourcing each component.
What's Included
- 5 × rolls of 3/4" x 600' CenFuse High Density Polyethylene (HDPE) Loop Pipe, SDR 11 (3,000 ft total)
- 1 × 1-1/4" x 3/4" 5-Circuit Insulated Header — Angle Pattern
- 1 × Geo-Pulse Non-Pressurized Geothermal Flow Center — Two Pump
- 1 × 1" x 12' Geothermal Hose Kit with 1" MPT to 1" Barb 90° Elbow Union Adapters
- 1 × ProTek PG Plus Propylene Glycol Heat Transfer Fluid, 5-Gallon Bucket
Compatibility & Installation
- Compatible equipment: Water-to-air geothermal heat pumps of matching tonnage (closed-loop or open-loop rated), including the GeoStar and Coldflow geothermal units sold on HVAC365.
- Loop design: Loop length and layout must be designed for your soil, climate and home load by a qualified geothermal designer; the kit tonnage should match the heat pump.
- Professional installation: Install by a licensed HVAC/geothermal professional per MRCOOL instructions and local code.
