Description
Product Summary
Harris Safety-Silv 56FC (part 56F3184) is a flux-coated, cadmium-free 56% silver brazing alloy, classified AWS BAg-7, in a 4 oz tube of 1/16 x 18 in rods.
The flux coating means there is no separate flux to apply, which keeps joints clean and saves time. With a low melting range of about 1145°F to 1205°F, it is used for brazing dissimilar metals such as copper to steel, copper to brass and stainless steel, including filter driers, valves and other fittings where lower heat and a bright, ductile joint matter.
Before you order, match the alloy to the metals you are joining and the fit-up of the joint. If you are not sure which alloy fits the job, call us at 1.888.509.3391 and we will help.
Key Features
- Silver content: 56% silver, AWS BAg-7, cadmium free
- Melting range: About 1145°F to 1205°F
- Format: Flux-coated 1/16 x 18 in rods, 4 oz tube
- Genuine Harris part: Part number 56F3184, factory new
Frequently Asked Questions
Is this a genuine Harris product?
Yes. This is the Harris 56F3184, factory new from The Harris Products Group.
Can I braze copper to steel with this alloy?
Yes. Silver brazing alloys like Safety-Silv 56 are used for dissimilar metals, including copper to steel, brass and stainless steel, which phos-copper alloys cannot join.
Is it cadmium free?
Yes. Safety-Silv alloys are cadmium free.
Should a professional do this work?
Yes. Brazing and soldering on HVAC and refrigeration systems should be done by a trained technician using proper ventilation, protective equipment and a nitrogen purge where required, following the codes that apply where you work.
