Description
Product Summary
Harris Stay-Silv 5 (part 5620F1) is a 5% silver phos-copper brazing alloy for copper joints in HVAC, refrigeration and plumbing work. This tube holds 28 flat rods measuring .050 x 1/8 x 20 in, about 1 lb of alloy, classified AWS BCuP-3.
With a melting range of about 1190°F to 1500°F, it bridges moderate gaps and builds a good fillet, and the silver content adds ductility over a no-silver alloy at a lower cost than 15% silver. It is self-fluxing on copper, so copper-to-copper joints need no flux; brazing brass requires a brazing flux such as Stay-Silv white flux.
Before you order, match the alloy to the metals you are joining and the fit-up of the joint. If you are not sure which alloy fits the job, call us at 1.888.509.3391 and we will help.
Key Features
- Silver content: 5% silver, AWS BCuP-3
- Melting range: About 1190°F to 1500°F
- Format: 28 flat rods, .050 x 1/8 x 20 in
- Genuine Harris part: Part number 5620F1, factory new
Frequently Asked Questions
Is this a genuine Harris product?
Yes. This is the Harris 5620F1, factory new from The Harris Products Group.
Do I need flux?
Not for copper-to-copper joints, because phosphorus in the alloy acts as the flux on copper. Brazing brass or bronze requires a brazing flux. Phos-copper alloys should not be used on steel, stainless steel or other ferrous metals.
Which silver content should I choose?
Higher silver adds ductility and helps joints handle vibration and loose fit-ups, which is why 15% silver is popular for HVAC connections. Lower or no-silver alloys flow well on close-fitting copper joints and cost less.
Should a professional do this work?
Yes. Brazing and soldering on HVAC and refrigeration systems should be done by a trained technician using proper ventilation, protective equipment and a nitrogen purge where required, following the codes that apply where you work.
