Description
The Rheem R802V0754A17UHSCAP is a 80% AFUE Classic Plus gas furnace with a 75,000 BTU/h input in a 17.5" wide cabinet. It pairs a two-stage gas valve that runs on low fire most of the time and steps up to full fire on the coldest days with a variable-speed ECM blower that ramps up slowly, moves air quietly and holds the right airflow for the cooling coil. It installs upflow or horizontal, which covers most basement, closet and attic jobs.
Built for steady, efficient heat
As an 80% furnace, it vents into a standard B-vent or lined chimney, which makes it a direct swap in many existing homes without running new PVC venting. The blower is sized for up to 4 tons of air conditioning, so it can serve as the indoor half of a matched split system with a Rheem cased coil of the same width.
This model is EcoNet enabled, so it can talk to a compatible Rheem EcoNet thermostat and outdoor unit for tighter control of staging and airflow.
Key Features
- Efficiency: 80% AFUE design that works with standard B-vent.
- Comfort: Two-stage heat for quieter, more even comfort.
- Blower: Variable-speed ECM blower for quiet, efficient airflow.
- Fit: 17.5" wide upflow/horizontal cabinet that lines up flush with a matching Rheem coil.
Frequently Asked Questions
What size home is a 75,000 BTU furnace good for?
Furnace size depends on climate, insulation, windows and duct design, not just square footage. A Manual J load calculation from your installer is the right way to confirm that 75,000 BTU/h is the right input for your home.
Can I add air conditioning to this furnace?
Yes. The blower supports up to 4 tons of cooling. Pair it with a Rheem RCFY cased coil that is 17.5" wide so the coil sits flush on top of the furnace, and an AHRI-matched Rheem condenser.
Does it run on propane?
It ships set up for natural gas. A Rheem LP conversion kit, sold separately, lets a qualified installer convert it to propane.
Can it replace my old furnace without new venting?
In many cases, yes. An 80% furnace vents into a properly sized B-vent or lined chimney, but your installer should confirm the existing vent meets code before reusing it.
Does it need professional installation?
Yes. Gas furnaces must be installed by a licensed professional, and Rheem requires registration to get the full warranty.
