Description
Rheem 5 Ton Heat Pump Split System: WP14AY60AJ2NA + RH2TY6024STANNJ
This system pairs the Rheem WP14AY60AJ2NA heat pump from the Endeavor Line Select Series with the RH2TY6024STANNJ air handler. It is an AHRI-matched combination (AHRI reference 214803219), which means the efficiency numbers below were certified for these two exact models working together. As a heat pump, it cools in summer and moves heat into the home in winter, with electric heat strips available as backup for the coldest days.
Certified system performance
- AHRI reference number: 214803219
- Nominal capacity: 5 ton (57,000 BTU/h cooling)
- Cooling efficiency: 15.2 SEER2
- Heating capacity: 55,000 BTU/h at 47°F
- Refrigerant: R-454B
- Power supply: 208/230V 1-Phase
Outdoor unit: Rheem WP14AY60AJ2NA
The WP14AY60AJ2NA is an Endeavor Line Select Series heat pump with a two-stage compressor. It runs on R-454B, the lower global-warming-potential refrigerant required in new U.S. residential systems.
- Nominal Capacity (Tons): 5
- Cooling Capacity (BTU/h): 54,000
- Heating Capacity (BTU/h): 54,000
- Refrigerant: R-454B
- Voltage/Phase/Hz: 208-230 V / 1 Ph / 60 Hz
- Minimum Circuit Ampacity (MCA): 33 A
- Maximum Overcurrent Protection (MOP): 50 A
- Compressor Type: Scroll
- Compressor Stages: 2
- Liquid Line Size: 3/8 in
- Suction Line Size: 7/8 in
- Factory Refrigerant Charge: 194 oz
- Sound Level (dB): 74
- Unit Dimensions (W x D x H): 35.54 in x 35.54 in x 39.17 in
- Unit Weight: 253 lb
- Shipping Weight: 303 lb
Air handler: Rheem RH2TY6024STANNJ
The RH2TY6024STANNJ is a matched Rheem air handler.
- Nominal Capacity (Tons): 5
- Airflow (CFM): 1,200-1,600
- Blower Motor Type: ECM (Electronically Commutated Motor), 3/4 HP
- Configuration: Multi-Position
- Metering Device: TXV/TEV - Thermostatic Expansion Valve
- Refrigerant: R-454B
- Voltage/Phase/Hz: 208-240 V / 1 Ph / 60 Hz
- Minimum Circuit Ampacity (MCA): 6 A (blower only, no electric heat)
- Liquid Line Size: 3/8 in
- Suction Line Size: 7/8 in
- Unit Dimensions (W x D x H): 24.5 in x 21.69 in x 55.5 in
- Unit Weight: 161 lb
- Shipping Weight: 178 lb
Electric heat
No heat strip is included with this system. If you want auxiliary or emergency electric heat, choose one from the Add an Electric Heat Strip option above. These are the Rheem kits approved for this air handler: RXBH-1724A05J-B (4.8 kW), RXBH-1724A07J-B (7.2 kW), RXBH-1724A10J-B (9.6 kW), RXBH-1724A15J-B (14.4 kW), RXBH-1724A18J-B (17.0 kW), RXBH-24A20J-B (19.2 kW), RXBH-24A25J-B (24.0 kW).
Sizing and installation
Size the system from a room-by-room load calculation (ACCA Manual J) rather than square footage alone. Climate, insulation, windows and duct condition all change the load, and an oversized system short-cycles and leaves humidity behind.
The outdoor unit and air handler each need their own electrical circuit sized to the rating plate. The refrigerant line set, thermostat, condensate drain, pad and installation materials are sold separately. Because R-454B is a mildly flammable (A2L) refrigerant, installation and service require a licensed HVAC technician using A2L-rated tools and the manufacturer's procedures, which also keeps the warranty in force.
Common questions
Is this a matched system?
Yes. AHRI certificate 214803219 covers the WP14AY60AJ2NA with the RH2TY6024STANNJ.
Does it come with a heat strip?
No. Heat strips are sold separately and can be added from the option above.
Can I reuse my old refrigerant lines?
Sometimes. Line sizes must match the outdoor unit and the lines must be clean, leak-free and compatible with R-454B. Your installer should inspect them and flush or replace them as needed.
White Paper
