Description
Mitsubishi R410A Blowout Sale – limited quantities. This dual-zone system is sold as a complete matched package only. The outdoor unit and indoor units in this bundle are not sold separately.
Overview
This Mitsubishi Electric dual-zone ductless heat pump system pairs the MXZ-2C20NA4 M-Series multi-zone outdoor unit with 2 x MSZ-GS06NA (6,000 BTU/h) wall-mounted indoor units, for a total connected capacity of 12,000 BTU/h across 2 independently controlled zones. The outdoor unit runs on 208/230V, 1-phase, 60 Hz power and uses a variable-speed INVERTER-driven twin rotary compressor with R410A refrigerant.
Rated non-ducted performance for the MXZ-2C20NA4 is 18,000 BTU/h cooling and 22,000 BTU/h heating at 47°F, with 13,500 BTU/h at 17°F. Efficiency is rated at 20.0 SEER2, 12.7 EER2 and 9.7 HSPF2. Heating operates down to 5°F outdoor (wet bulb). Cooling operates from 14°F to 115°F outdoor.
Smart Features
- MSZ-GS indoor units: compatible with the kumo cloud app through an optional Wi-Fi adapter, plus wired or wireless controller options.
- Each zone has its own handheld remote and setpoint, so unused rooms can be turned down or off.
- Automatic restart after a power outage.
Comfort and Noise
Indoor units run as quiet as 19 dB(A) on the lowest fan speed, and the outdoor unit is rated at 50 dB(A) cooling and 54 dB(A) heating. Variable-speed operation matches output to the load, which reduces temperature swings and drafts compared with single-speed equipment.
Use Case Fit
This 6K + 6K combination suits two rooms, such as a primary bedroom and a home office, or a living area and a bedroom, as well as additions, condos and older homes without ductwork. Smaller 6K heads fit bedrooms and offices, keeping each zone right-sized.
Value and Reliability
Mitsubishi Electric multi-zone systems are known for long service life and low operating cost. The outdoor coil uses Blue Fin anti-corrosion treatment, and the indoor units use Dual Barrier Coating to keep the fan and coil cleaner. Warranty is 7 years on the compressor and 5 years on parts with registration within 90 days of purchase. This blowout price is well below buying the same components individually.
Summary Wrap-Up
A complete, matched Mitsubishi M-Series dual-zone package with 6K + 6K wall-mounted indoor units, sold as a bundle only at blowout pricing while stock lasts. Installation by a licensed HVAC professional is required; line sets, communication wire, disconnects and pads are not included.
Key Features
- Matched system: MXZ-2C20NA4 outdoor unit with 2 x MSZ-GS06NA (6,000 BTU/h).
- 2 zones: each room gets its own indoor unit and remote.
- Efficiency: 20.0 SEER2 / 9.7 HSPF2 (non-ducted).
- Heat pump: heating down to 5°F outdoor.
- INVERTER-driven twin rotary compressor for variable-speed comfort.
- R410A refrigerant, factory pre-charged for up to 131 ft of piping.
Outdoor Unit Specifications – MXZ-2C20NA4
Indoor Unit Specifications – MSZ-GS06NA (qty 2)
What's Included
- 1 x MXZ-2C20NA4 outdoor unit
- 2 x MSZ-GS06NA wall-mounted indoor unit with remote
Not included: line sets, communication cable, electrical disconnect, condensate pump or line hide, and mounting pad/brackets.
White Paper
