Description
Rheem 10 Ton Commercial Heat Pump Package Unit (RHPDZT120ACG000ABAA0)
The Rheem RHPDZT120ACG000ABAA0 is a 10 ton Commercial Prestige® Series rooftop heat pump from the Renaissance™ line, built for retail stores, offices, restaurants, schools, churches and light industrial spaces on 208/230V 3-Phase power. It is factory charged with R-410A, wired and run tested, and ships as one self-contained cabinet on forkable base rails. It is offered in our Clearance section while current distributor stock lasts.
Key features
Variable frequency drive blower. A belt drive blower with a standard VFD, set up for medium external static, lets the contractor match airflow to the duct system at startup and run the fan at the speed the building really needs.
Two-stage heat pump. A two-stage scroll compressor runs at low stage most of the year, which is where the IEER rating comes from, then steps up on the hottest and coldest days.
Convertible, field friendly cabinet. The cabinet converts between downflow and horizontal duct connections in the field, and the one-piece top cover and two-piece control door make it easy to set and service.
PlusOne® ServiceSmart design. Qwik-Change filter rack, Qwik-Slide blower assembly and Qwik-Clean drain pan cut routine service time, while PlusOne diagnostics with a dual LED display, an overflow condensate sensor and external lockable gauge ports help technicians work fast.
Performance
This unit is rated at 114,000 BTU/h of AHRI net cooling with 14.1 IEER and 11 EER. In heating mode it delivers 114,000 BTU/h at 47°F outdoor and 72,000 BTU/h at 17°F, and a matched Rheem electric heat kit can be added for backup and defrost heat. Nominal airflow is about 4,000 CFM.
Installation notes
The unit runs on 208/230V 3-Phase power and uses four 20 x 25 x 2 inch filters with a 3/4 inch condensate connection. It fits Rheem D cabinet roof curbs and accessories. Have a licensed HVAC contractor size the unit, verify the electrical service and confirm the job meets your local code.
Frequently asked questions
Is this an R-410A unit?
This unit is factory charged with R-410A. Rules for installing new R-410A equipment differ by project type and location, so confirm with your contractor and local code official before you buy. If your project needs an A2L (R-454B) unit, HVAC365 also carries the current Rheem R-454B lineup.
Is this unit new?
Yes. This is new, never-installed equipment from current distributor stock. It is listed in our Clearance section because quantities are limited, and once these units sell through they will not be restocked.
Does it include a roof curb or economizer?
No. Roof curbs and economizers are sold separately and must match the Rheem D cabinet. Contact our team if you need help choosing them.
What does IEER mean on a 10 ton rooftop unit?
IEER (Integrated Energy Efficiency Ratio) weights efficiency at full and part load the way commercial equipment really runs, so it is a better measure of yearly operating cost than full load EER alone.
