Description
Rheem 4 Ton Commercial Heat Pump Package Unit (RHPCZR048ACT000ACAA0)
The Rheem RHPCZR048ACT000ACAA0 is a 4 ton Commercial Classic® packaged heat pump built for retail stores, offices, restaurants, schools, churches and light industrial spaces with 208/230V 3-Phase power. Everything that heats and cools the building lives in one self-contained cabinet, so the install is a curb or slab, a duct connection, power and a condensate line. This unit is factory charged with R-410A and is offered in our Clearance section while current distributor stock lasts.
Key features
Convertible airflow. The cabinet ships ready for downflow and converts in the field to horizontal side discharge, so one model fits rooftop curbs and slab-mounted jobs alike.
Quiet, efficient direct drive ECM blower. A multi-speed ECM indoor blower lets the installer dial in airflow at startup without changing belts or pulleys, and it uses less power than a standard PSC motor.
Year-round comfort from one unit. The heat pump cycle cools in summer and heats in the shoulder seasons without a gas line. An optional electric heat kit adds backup heat for colder mornings and defrost periods.
Built for easy service. Rheem PlusOne® ServiceSmart features such as the slide-out blower assembly, removable drain pan and external lockable gauge ports keep routine maintenance quick, and onboard diagnostics show fault codes right at the control board.
Performance
This 4 ton unit delivers 46,000 BTU/h of AHRI rated net cooling with a scroll compressor, TXV metering and MicroChannel coils, rated at 14 SEER, 11 EER (10.6 EER2) and 8 HSPF (6.7 HSPF2). In heating mode it is rated at 46,000 BTU/h at 47°F outdoor and 20,000 BTU/h at 17°F, which is why most colder climate jobs pair it with an electric heat kit. Nominal airflow is about 1,600 CFM.
Installation notes
The unit runs on 208/230V 3-Phase power and takes four 16 x 16 x 2 inch filters. It is a field installed unit with a 3/4 inch condensate connection. A 14 inch Rheem roof curb, a downflow economizer and electric heat kits matched to this cabinet can be added right on this page. Have a licensed HVAC contractor size the unit, check the electrical service and confirm the job meets your local code.
Frequently asked questions
Is this an R-410A unit?
This unit is factory charged with R-410A. Rules for installing new R-410A equipment differ by project type and location, so confirm with your contractor and local code official before you buy. If your project needs an A2L (R-454B) unit, HVAC365 also carries the current Rheem R-454B lineup.
Is this unit new?
Yes. This is new, never-installed equipment from current distributor stock. It is listed in our Clearance section because quantities are limited, and once these units sell through they will not be restocked.
Does it come with a roof curb or economizer?
No. The curb and economizer are sold separately. Use the add-on choices above to include a matched Rheem roof curb and economizer, or choose No, Thank You if your site already has them.
What size building does a 4 ton package unit fit?
Sizing depends on the building envelope, occupancy, glass, ventilation and climate, so there is no single square footage answer. A load calculation by your contractor is the right way to confirm a 4 ton unit fits your space.
White Paper
