Description
Product Summary
The White-Rodgers 50E47-843 is an ignition module from White-Rodgers, described by the manufacturer as: universal hot surface ignition control with variable timings. It is used with hot surface ignition systems. It replaces 50E47-30 50 60 70 130 140 150 160 170 850 851 860.
An ignition module runs the ignition sequence on a gas appliance: it powers the igniter, spark or pilot, opens the gas valve and proves flame within a set trial time, locking out if flame is not detected. Typical signs of a failed module are no spark or igniter glow during a call for heat, a gas valve that never receives voltage, or repeated lockouts after the flame sensor, pressure switch and wiring have been checked.
Before you order, match 50E47-843 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine White-Rodgers part: Manufacturer part number 50E47-843, factory new.
- Ignition Type: Hot Surface.
- Cross-reference: Replaces 50E47-30 50 60 70 130 140 150 160 170 850 851 860.
- Part type: Ignition Module.
Frequently Asked Questions
Is this a genuine White-Rodgers part?
Yes. This is the White-Rodgers 50E47-843, a factory-new ignition module from White-Rodgers.
How do I make sure it fits my equipment?
Compare 50E47-843 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 50E47-843 replace?
The White-Rodgers 50E47-843 replaces 50E47-30 50 60 70 130 140 150 160 170 850 851 860.
Will a universal ignition module work on my equipment?
It will when the ignition type, voltage, flame sensing method and timings can be matched to the original control. Check the cross-references listed for this part.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
