Description
Product Summary
The White-Rodgers 50E47U-843 is an integrated furnace control from White-Rodgers, described by the manufacturer as: universal hot surface ignition module. designed to replace 24V 120V or 240V non integrated hot surface ignition (HSI) modules in A wide variety of heating applications. It is rated for multiple voltages and used with hot surface ignition systems. It replaces Hundreds Of Part Numbe.
An integrated furnace control combines the ignition sequence, blower timing, safety circuit monitoring and diagnostic LED codes on one board. Replace the board when it shows burnt traces or failed relays, does not respond to a thermostat call with correct power, or gives incorrect diagnostics after the sensors and switches it monitors test good.
Before you order, match 50E47U-843 to the part number on the part you are replacing or in your equipment's repair parts list, and confirm the voltage, size and connections match your equipment. If you are not sure which part your equipment needs, call us at 1.888.509.3391 with the model and serial number and we will confirm it for you.
Key Features
- Genuine White-Rodgers part: Manufacturer part number 50E47U-843, factory new.
- Voltage: Multi-Voltage.
- Ignition Type: Hot Surface.
- Cross-reference: Replaces Hundreds Of Part Numbe.
Frequently Asked Questions
Is this a genuine White-Rodgers part?
Yes. This is the White-Rodgers 50E47U-843, a factory-new integrated furnace control from White-Rodgers.
How do I make sure it fits my equipment?
Compare 50E47U-843 with the part number printed on the part you are replacing or listed in your equipment's repair parts list, and confirm the voltage and connections match. If you are not sure, call us at 1.888.509.3391 with your model and serial number and we will confirm it.
What part numbers does the 50E47U-843 replace?
The White-Rodgers 50E47U-843 replaces Hundreds Of Part Numbe.
How do I read the flash codes?
The code chart is printed on a label inside the furnace door or in the control's instructions. The flashing LED points to the circuit that caused the shutdown.
Should a professional install this part?
Yes. Gas, electrical, hydronic and combustion components should be installed by a qualified technician who can test the system afterward and follow the codes that apply where you live.
