Description
The Goodman 2.5 Ton 15.2 SEER2 92% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 (GLXS5BA3010 / GR9S920805CN / CAPTA3026C3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2.5-ton R-32 air conditioner, 92% AFUE high-efficiency gas furnace, and 2.5-ton cased evaporator coil for energy-efficient cooling and reliable heating.
Designed for upflow installation, the system draws return air through the bottom and supplies conditioned air from the top. The furnace features single-stage heating and a multi-speed ECM blower motor for consistent airflow and efficient operation.
Key Features
- 2.5 Ton Cooling Capacity – Delivers 30,000 BTU of residential cooling
- 15.2 SEER2 Efficiency – Supports energy-efficient cooling performance
- 80,000 BTU Gas Furnace – Provides dependable single-stage heating
- 92% AFUE Efficiency – Converts approximately 92% of fuel into usable heat
- Upflow R-32 Configuration – Suitable for basements, closets, utility rooms, and mechanical rooms
- Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
- Matched 2.5 Ton Coil – Supports proper cooling capacity and system performance
System Components Included
- Goodman GLXS5BA3010 2.5 Ton 15.2 SEER2 R-32 Air Conditioner
- Goodman GR9S920805CN 80,000 BTU 92% AFUE Single-Stage Gas Furnace
- Goodman CAPTA3026C3 2.5 Ton Cased Upflow/Downflow R-32 Evaporator Coil
Compatibility & Installation Notes
The GLXS5BA3010 / GR9S920805CN / CAPTA3026C3 system is designed for residential upflow applications. Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, and approved high-efficiency furnace venting must be confirmed before installation.
The complete equipment combination should also be checked against applicable AHRI matching data to verify its certified efficiency and performance ratings.
Installation Notes
- Verify compatibility with the existing upflow ductwork
- Confirm electrical service and natural gas connection requirements
- Check the required refrigerant line sizes before installation
- Install approved high-efficiency furnace venting
- Provide proper drainage for both the condensing furnace and evaporator coil
- Confirm adequate installation and service clearances
- Verify the complete system’s AHRI-rated performance
- Installation should be completed by a qualified HVAC professional
Frequently Asked Questions
What is included in this Goodman HVAC system?
The package includes the GLXS5BA3010 air conditioner, GR9S920805CN gas furnace, and CAPTA3026C3 cased evaporator coil.
What is the cooling capacity of this system?
The system provides 2.5 tons or 30,000 BTU of cooling capacity.
Is the furnace single-stage or two-stage?
The Goodman GR9S920805CN is a single-stage gas furnace that delivers consistent heating output.
What is the approximate heating output?
With a 92% AFUE rating, the 80,000 BTU furnace provides approximately 73,600 BTU of usable heating output.
How does an upflow HVAC system operate?
An upflow system draws return air through the bottom of the furnace and supplies heated or cooled air from the top into the ductwork.
Does this condensing furnace require drainage?
Yes. A 92% AFUE condensing furnace produces condensate and requires an approved drainage system in addition to the evaporator coil drain.
Does this system use R-32 refrigerant?
Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant.
White Paper
- Goodman GLXS5B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9S92 Spec Sheet
- Goodman Evaporator Coil Spec Sheet
- Goodman CAPTA/CAPFA Coil Installation Manual
- Goodman GLXS5BA Repair Parts List (RP-G4347A)
- Goodman GR9S Repair Parts List (RP-G2356)
- Goodman CAPTA Repair Parts List (RP-4359A)
