Goodman 2.5 Ton 15 SEER2 80% AFUE 100,000 BTU Gas Electric Air Conditioner Split System Horizontal R-32 | GLXS5BA3010 GR9S801005CX CHPTA3026C3

The Goodman 2.5 Ton 15 SEER2 80% AFUE 100,000 BTU Gas Electric Air Conditioner Split System Horizontal R-32 (GLXS5BA3010 / GR9S801005CX / CHPTA3026C3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2.5-ton R-32 air conditioner, 80% AFUE gas furnace, and 2.5-ton horizontal cased evaporator coil for efficient cooling and reliable heating.

Designed for horizontal installation, the system features a single-stage gas furnace and a multi-speed ECM blower motor for consistent airflow and efficient operation. Its horizontal configuration makes it suitable for attics, crawl spaces, and other limited-height installation areas.

Key Features

• 2.5 Ton Cooling Capacity – Delivers 30,000 BTU of residential cooling
• 15 SEER2 Efficiency – Supports efficient cooling performance
• 100,000 BTU Gas Furnace – Provides dependable single-stage heating
• 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
• Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
• Horizontal Configuration – Suitable for attics, crawl spaces, and limited-height areas
• R-32 Refrigerant System – Uses next-generation refrigerant technology

System Components Included

• Goodman GLXS5BA3010 2.5 Ton 15 SEER2 R-32 Air Conditioner
• Goodman GR9S801005CX 100,000 BTU 80% AFUE Single-Stage Gas Furnace
• Goodman CHPTA3026C3 2.5 Ton Cased Horizontal R-32 Evaporator Coil

Compatibility & Installation Notes

The GLXS5BA3010 / GR9S801005CX / CHPTA3026C3 system is configured for residential horizontal applications. Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, and approved furnace venting must be confirmed before installation.

The complete equipment combination and stated 15 SEER2 efficiency should be verified using the applicable AHRI certification. A professional heating-load calculation is also recommended to confirm that the 100,000 BTU furnace is properly sized for the property.

Specifications

• System Type: Gas Electric Split System
• Cooling Capacity: 2.5 Ton / 30,000 BTU
• Evaporator Coil Capacity: 2.5 Ton
• Heating Input: 100,000 BTU
• Heating Output: Approximately 80,000 BTU
• Cooling Efficiency: 15 SEER2
• Furnace Efficiency: 80% AFUE
• Furnace Stages: Single Stage
• Blower Motor: Multi-Speed ECM
• Refrigerant: R-32
• Installation Orientation: Horizontal

Installation Notes

• Verify compatibility with the existing horizontal ductwork
• Complete a heating-load calculation to confirm proper furnace sizing
• Confirm the equipment combination and AHRI-rated efficiency
• Confirm electrical service and natural gas connection requirements
• Check the required refrigerant line sizes before installation
• Install approved furnace venting and proper evaporator-coil condensate drainage
• Maintain the required equipment clearances and service access
• Installation should be completed by a qualified HVAC professional

Frequently Asked Questions

What is included in this Goodman HVAC system?

The package includes the GLXS5BA3010 air conditioner, GR9S801005CX gas furnace, and CHPTA3026C3 horizontal evaporator coil.

What is the cooling capacity of this system?

The system provides 2.5 tons or 30,000 BTU of cooling capacity.

Is this system suitable for horizontal installation?

Yes. The system is configured for horizontal installation, making it suitable for attics, crawl spaces, and other limited-height areas.

Is the furnace single-stage or two-stage?

The Goodman GR9S801005CX is a single-stage gas furnace that provides consistent heating output.

What does 80% AFUE mean?

It means approximately 80% of the furnace’s fuel is converted into usable heating energy, providing an estimated heating output of 80,000 BTU.

How can I determine whether the 100,000 BTU furnace is correctly sized?

A qualified HVAC professional should perform a heating-load calculation based on the property’s size, insulation, windows, climate, and construction characteristics.

Does this system use R-32 refrigerant?

Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant.