Goodman 2.5 Ton 16 SEER2 80% AFUE 60,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 | GLXS5BA3010 GR9T800603BN CAPTA3626B3

Designed for upflow installation, the system draws return air through the bottom and supplies conditioned air from the top. The furnace features two-stage heating and a multi-speed ECM blower motor, helping provide consistent airflow, improved comfort, and efficient operation.

Key Features

• 2.5 Ton Cooling Capacity – Delivers 30,000 BTU of residential cooling
• 16 SEER2 Efficiency – Supports energy-efficient cooling performance
• 60,000 BTU Gas Furnace – Provides dependable two-stage heating
• 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
• Upflow R-32 Configuration – Suitable for basements, closets, utility rooms, and mechanical rooms
• Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
• 3 Ton Evaporator Coil – Supports the matched system’s airflow and efficiency requirements

System Components Included

• Goodman GLXS5BA3010 2.5 Ton 16 SEER2 R-32 Air Conditioner
• Goodman GR9T800603BN 60,000 BTU 80% AFUE Two-Stage Gas Furnace
• Goodman CAPTA3626B3 3 Ton Cased Upflow/Downflow R-32 Evaporator Coil

Compatibility & Installation Notes

The GLXS5BA3010 / GR9T800603BN / CAPTA3626B3 system is designed for residential upflow applications. Although the evaporator coil has a nominal 3-ton capacity, it may be paired with the 2.5-ton condenser as part of an approved matched configuration. The complete combination should be verified using applicable AHRI certification data.

Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, and approved furnace venting must be confirmed before installation.

Installation Notes

• Verify compatibility with the existing upflow ductwork
• Confirm electrical service and natural gas connection requirements
• Check the required refrigerant line sizes before installation
• Install approved furnace venting and proper evaporator-coil condensate drainage
• Use a compatible two-stage thermostat to access full staging functionality
• Confirm adequate installation and service clearances
• Verify the complete system’s AHRI-rated performance
• Installation should be completed by a qualified HVAC professional

Frequently Asked Questions

What is included in this Goodman HVAC system?

The package includes the GLXS5BA3010 air conditioner, GR9T800603BN gas furnace, and CAPTA3626B3 cased evaporator coil.

What is the cooling capacity of this system?

The system provides 2.5 tons or 30,000 BTU of cooling capacity.

Is the furnace single-stage or two-stage?

The Goodman GR9T800603BN is a two-stage gas furnace, allowing it to operate at a lower heating level during mild conditions and increase its output when additional heat is required.

Does this system require a two-stage thermostat?

A compatible two-stage thermostat is recommended to provide proper control over both furnace heating stages.

What is the approximate heating output?

With an 80% AFUE rating, the 60,000 BTU furnace provides approximately 48,000 BTU of usable heating output.

Why is a 3-ton evaporator coil paired with a 2.5-ton air conditioner?

A larger nominal coil may be used to achieve the system’s targeted efficiency and airflow performance. The exact combination should be confirmed using applicable AHRI certification data.

Does this system use R-32 refrigerant?

Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant