Description
The Goodman 2 Ton 15.2 SEER2 80% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 (GLXS5BA2410 / GR9T800804BX / CAPTA2422B3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2-ton R-32 air conditioner, 80% AFUE two-stage gas furnace, and 2-ton cased evaporator coil for energy-efficient cooling and reliable heating.
Designed for upflow installation, the system features a two-stage gas valve and a multi-speed ECM blower motor for improved temperature control, consistent airflow, and efficient operation. Its upflow configuration is suitable for basements, utility rooms, closets, and other applications where conditioned air is supplied from the top of the furnace.
Key Features
- 2 Ton Cooling Capacity – Delivers 24,000 BTU of residential cooling
- 15.2 SEER2 Efficiency – Supports energy-efficient cooling performance
- 80,000 BTU Gas Furnace – Provides dependable residential heating
- Two-Stage Heating – Adjusts heating output according to indoor comfort requirements
- 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
- Multi-Speed ECM Blower – Supports consistent and efficient airflow
- Upflow R-32 System – Designed for residential upflow applications
System Components Included
- Goodman GLXS5BA2410 2 Ton 15.2 SEER2 R-32 Air Conditioner
- Goodman GR9T800804BX 80,000 BTU 80% AFUE Two-Stage Gas Furnace
- Goodman CAPTA2422B3 2 Ton Cased Upflow/Downflow R-32 Evaporator Coil
Compatibility & Installation Notes
The GLXS5BA2410 / GR9T800804BX / CAPTA2422B3 system is designed for residential upflow applications. Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, thermostat, and furnace venting must be confirmed before installation.
A compatible two-stage thermostat is recommended to access the furnace’s full staging capabilities. The complete system combination and applicable AHRI-rated performance should also be verified before purchase and installation.
Installation Notes
- Verify compatibility with the existing upflow ductwork
- Confirm electrical service and natural gas connection requirements
- Check the required refrigerant line sizes before installation
- Install properly sized and approved furnace venting
- Provide proper evaporator-coil condensate drainage
- Confirm thermostat compatibility with two-stage heating
- Verify the complete system’s AHRI-rated combination
- Installation should be completed by a qualified HVAC professional
Frequently Asked Questions
What is included in this Goodman HVAC system?
The package includes the GLXS5BA2410 air conditioner, GR9T800804BX gas furnace, and CAPTA2422B3 cased evaporator coil.
What is the cooling capacity of this system?
The system provides 2 tons or 24,000 BTU of cooling capacity.
Is the furnace single-stage or two-stage?
The Goodman GR9T800804BX is a two-stage gas furnace. It can operate at a lower heating level during milder conditions and increase its output when additional heat is required.
What does 80% AFUE mean?
It means approximately 80% of the furnace’s fuel is converted into usable heating energy, providing an estimated maximum heating output of 64,000 BTU.
Is this system designed for upflow installation?
Yes. This system is configured for upflow installation, meaning return air enters through the bottom and conditioned air is discharged through the top.
Does this system require a two-stage thermostat?
A compatible two-stage thermostat is recommended to provide direct control over both furnace heating stages. Final thermostat requirements should be confirmed with the installer.
White Paper
- Goodman GLXS5B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9T80/GD9T80 Spec Sheet
- Goodman GR9T80/GD9T80 Installation Manual
- Goodman Evaporator Coil Spec Sheet
- Goodman CAPTA/CAPFA Coil Installation Manual
- Goodman GLXS5BA Repair Parts List (RP-G4347A)
- Goodman GR9T Repair Parts List (RP-G2355)
- Goodman CAPTA Repair Parts List (RP-4359A)
